HELPFUL TIP

If your engine switch reads “push to stop”, it is always in the ON position.

HOW TO STOP YOUR UNIT

STo stop the engine, push and hold the STOP switch in the STOP position until the engine stops.

SIf engine does not stop, move choke to the FULL CHOKE position.

HOW TO START YOUR UNIT

WARNING: The trimmer head will turn while starting the engine. Avoid any con- tact with the muffler. A hot muffler can cause serious burns.

HELPFUL TIP

If your engine still does not start after following these instructions, please call 1-800-554-6723.

STARTING A COLD ENGINE (or a warm engine after running out of fuel)

Starting Position

1.Set unit on a flat surface.

2.Slowly press the primer bulb 6 times.

3.Move choke lever to the FULL CHOKE position.

4.Squeeze the throttle trigger fully and hold through all remaining steps.

Primer Bulb

Choke

Lever

Starter Handle

5.Pull starter rope handle sharply until engine sounds as if it is trying to start, but do not pull rope more than 6 times.

6.As soon as engine sounds as if it is trying to start, move choke lever to HALF CHOKE position.

7.Pull starter rope sharply until engine runs, but no more than 6 pulls.

NOTE: If the engine doesn’t start after 6 pulls (at the HALF CHOKE position), move the choke lever to the FULL CHOKE position and press the primer bulb 6 times. Squeeze and hold the throttle trigger and pull the starter rope 2 more times. Move the choke lever to the HALF CHOKE position and pull the start- er rope until the engine runs, but no more than 6 pulls. If the engine still doesn’t start, it is probably flooded. Proceed to

STARTING A FLOODED ENGINE.

8.Once the engine starts, allow it to run 10 se- conds, then move the choke lever to the RUN position. Allow the unit to run for 30 more seconds at RUN before releasing the throttle trigger.

NOTE: If engine dies with the choke le- ver in the RUN position, move the choke lever to the HALF CHOKE position and pull the rope until engine runs, but no more than 6 pulls.

STARTING A WARM ENGINE

1.Move the choke lever to the HALF CHOKE position.

2.Squeeze and hold the throttle trigger. Keep throttle trigger fully squeezed until the en- gine runs smoothly.

3.Pull starter rope sharply until engine runs, but no more than 6 pulls.

4.Allow engine to run 15 seconds, then move the choke lever to RUN.

NOTE: If engine has not started, pull starter rope 5 more pulls. If engine still does not run, it is probably flooded.

STARTING A FLOODED ENGINE

Flooded engines can be started by placing the choke lever in the RUN position; then, pull the rope to clear the engine of excess fuel. This could require pulling the starter handle many times depending on how badly the unit is flooded. If the unit still doesn’t start, refer to TROUBLESHOOTING TABLE or call 1-800-554-6723.

5

Page 4 Page 6
Page 5
Image 5
Weed Eater 545154699 HOW to Stop Your Unit, HOW to Start Your Unit, Starting a Warm Engine, Starting a Flooded Engine
Page 4 Page 6

545154699 specifications

The Weed Eater 545154699 is a powerful and efficient outdoor tool designed to maintain your lawn and garden with ease. This string trimmer is equipped with advanced features that enhance its performance and usability, making it an essential addition to any homeowner’s gardening arsenal.

One of the standout features of the Weed Eater 545154699 is its lightweight design. Weighing in at just a few pounds, it allows for easy maneuverability without sacrificing power. This makes it an excellent choice for both small and large yards, as users can effortlessly cover extensive areas without experiencing fatigue.

The trimmer is powered by a robust 2-cycle engine, delivering impressive cutting power. This engine is designed to provide optimal performance, allowing the user to tackle even the toughest weeds and grass with confidence. The 545154699 model features easy starting technology, which minimizes the hassle of igniting the engine, ensuring that you can get to work quickly.

Another significant characteristic of the Weed Eater 545154699 is its adjustable cutting width. Users can select between different cutting paths to suit their specific needs, making it versatile for various tasks. From trimming the edges of walkways to tackling overgrown garden beds, this trimmer can adapt to different challenges seamlessly.

The trimmer also boasts a dual-line cutting system, which increases efficiency and reduces the time spent on trimming. The dual lines work simultaneously to cut the grass, allowing for a cleaner and more precise finish. Additionally, the trimmer head is equipped with an easy-to-load spool, making it convenient to replace the string without any complicated procedures.

The ergonomic design of the Weed Eater 545154699 features a well-balanced handle, providing comfort during extended use. Its adjustable handle allows users to find the perfect grip, further enhancing the overall user experience.

Moreover, the durability of the materials used in its construction ensures that the trimmer can withstand the rigors of outdoor use. It's built to last, making it a wise investment for anyone looking to maintain their outdoor space efficiently.

In conclusion, the Weed Eater 545154699 combines power, versatility, and user-friendly features, making it an exemplary choice for anyone seeking a reliable string trimmer. Whether you are a professional landscaper or a weekend gardener, this outdoor tool is designed to help you achieve a beautifully manicured lawn effortlessly.
Top Page Image Contents