SETUP AND CONNECTIONS

HOW TO HOOK UP A VCR OR CAMCORDER

To hook up a VCR or camcorder for copying tapes, use Connection E or F.

CONNECTION A:

Attaching to a Dipole Antenna (With No Cable Box)

Follow these steps to connect a dipole antenna to your TV/VCR. Do not connect a dipole antenna if you plan to connect a different type of indoor or outdoor antenna or cable system. Optional accessories may be required for this connection.

1.Insert the antenna base into the slot on the back of your TV/VCR.

2.Connect the twin-lead ends of the antenna to the screw terminals of an antenna adapter.

3.Connect an antenna adapter to the IN FROM ANTENNA jack on the back of the TV/VCR.

4.Plug the TV/VCR power cord into the back of the TV/VCR.

5.Go to “Step 5: Connect the G-LINK Cable.”

Once you have plugged in your TV/VCR, adjust the length and position of the antenna rods for the best reception. For viewing VHF channels, extend the rods fully. For UHF viewing, shorten the rods.

 

Antenna Base

 

Antenna Slot

 

Twin-Lead Ends

 

Antenna Adapter

 

IN FROM

 

ANTENNA

INPUT

 

G-LINK

AUDIO

VIDEO

CONNECTION B:

Attaching to an Outside Antenna, Set-top Antenna, or Cable System (With No Cable Box)

1.Connect as shown. Optional accessories may be required for this connection.

2.Plug the TV/VCR power cord into the back of the TV/VCR.

3.Go to “Step 5: Connect the G-LINK Cable.”

Match Your Type of Antenna or Cable

or

or

or

Antenna

Antenna

Mixers

Adapter

 

Back of TV/VCR

IN FROM

ANTENNA

INPUT

G-LINK

AUDIO VIDEO

5

Page 7
Image 7
RCA T13066 HOW to Hook UP a VCR or Camcorder, Connection a, Attaching to a Dipole Antenna With No Cable Box, Connection B