OPERATING INSTRUCTIONS
BASIC RECORDING
The GUIDE Plus+ system recording timer will override the VCR
1.Insert a tape with safety tab in place. The TV/VCR will turn on.
2.Press SPEED to select a recording speed. The tape speed indicator appears.
3.Select the channel to be recorded.
4.Press REC•VCR+ on the remote to begin recording. The indicator light in the REC button on the front of the TV/VCR turns on during recording.
5.Press STOP/EJECT on the TV/VCR or STOP on the remote to stop recording.
EXPRESS RECORDING
The GUIDE Plus+ system recording timer will override the VCR
Express recording lets you record up to four hours or to the end of the tape without programming the timer. You can begin recording immediately. The TV/VCR will stop automatically at the end of the recording.
To use express recording:
1.Insert a tape with safety tab in place. The TV/VCR will turn on.
2.Select the channel to be recorded.
3.Press SPEED to select a recording speed. You can also change the speed of the recording in progress.
4.Press REC•VCR+ twice to activate express recording.
5.Press REC•VCR+ repeatedly until the desired amount of recording time is displayed.
6.During express recording, press REC•VCR+ to display the time remaining on the screen. Press REC•VCR+ again to increase the recording time. The TIMER indicator on the TV/VCR’s front panel will light during express recording.
RECORD LENGTH 0:00
CH 04
Press REC to set length
Each time you press RECORD, the recording time increases as shown below:
Press RECORD | Recording Time |
0:30 | (30 minutes) |
1:00 | (One hour) |
1:30 | (One hour 30 min) |
2:00 | (Two hours) |
3:00 | (Three hours) |
4:00 | (Four hours) |
0:00:00 | (Normal record) |
0:00 | (Turns off) |
2 9
