RCA T19067, T13066 manual Automatic Tracking, Manual Tracking, Time Counter, Commercial Scan

OPERATING INSTRUCTIONS

Automatic Tracking

The TV/VCR has automatic tracking which adjusts the picture when playing a tape that was recorded on another VCR. Automatic tracking is turned on whenever a tape is inserted or the TV/VCR’s power is turned on.

Manual Tracking

Occasionally, you may need to manually adjust tracking on a tape recorded on a different VCR or camcorder. Tracking is used when playing a tape. It has no effect during recording.

•When streaks or snow appear in the picture during normal playback or slow motion, press TRACKING + or - on the remote or CH ^ or v on the TV/VCR for the best possible picture.

•To return to automatic tracking the tape must be removed from the VCR and re-inserted.

Time Counter

The time counter helps locate the beginning or end of programs you taped. The time counter automatically resets to 0:00:00 whenever a tape is inserted, or when CLEAR is pressed while the time counter is displayed.

For example, if a 30-minute program was recorded at the beginning of the tape and you wanted to record another program after it, you should:

1.Insert the pre-recorded tape.

2.Press INFO twice to display the time counter and fast forward the tape until 30 minutes appears on the screen. Then you can begin recording a second program.

0:30:00

Hours

Minutes

Seconds

This is the approximate end of the program and you can begin recording at this spot.

3.Press INFO again or eject the tape to remove the time counter from the screen.

Commercial Scan

This is useful for skipping commercials or short program segments. Press SEARCH during playback to advance the tape approximately 60 seconds.

VCR1 ON•OFF TV

DVD	VCR2	AUX SAT•CABLE
MUTE		SEARCH
	CH +
VOL		VOL
		CH
SPEED		GO BACK

GUIDEINFO

OK

MENUCLEAR

1 2 3

4 5 6

7 8 9

INPUT			ANTENNA
	0
REVERSE	PLAY		FORWARD
REC•VCR+	STOP		PAUSE
- TRACKING +		EDIT	FR. ADV

2 4