RCA T19067, T13066 manual Setup and Connections

SETUP AND CONNECTIONS

To complete GUIDE Plus+ setup, the G-LINK cable must be properly attached to your cable box if you have one. See “Step 5: Connect the G-LINK Cable,” later in this section.

Select your country and enter your ZIP or Postal code. For Canada, use

CH ^ and v to select letters.

The next series of screens asks you about your cable TV setup. If you have a cable box, you must set the GUIDE Plus+ system to control it. Otherwise, it will not be able to locate and download program information.

Tune your cable box to Channel 2 and then select the brand of your cable box from the choices available. The system then searches for the correct code to control your cable box. When your cable box switches to channel 9 it has located the correct code.

Select Yes if the cable box changed to channel 9, or No if it did not. If you select No, the system will try another code.

If the GUIDE Plus+ system cannot recognize your cable box after several tries, a screen stating “Cable Box test failed...Please consult your manual and try again” appears. Choose either Try Again or Skip Cable Box Setup. If you get this message, you should also:

•Double check the brand of your cable box, and try entering it again.

•Check to make sure the G-LINK cable is attached correctly.

If you choose to skip the cable box setup some features of the guide may not be available until you successfully complete this procedure.

1 0