RCA T13066, T19067 manual Using the Input Button, Modes of Operation

USING THE REMOTE

CLEAR Removes any menu or display from the screen and returns you to TV viewing. Also exits the GUIDE Plus+ menu system. Allows you to change menu entries or clear a timer recording. Resets time counter to 0:00:00 when displayed.

Number Buttons (0-9)Enters channel numbers, digits for programming the remote, and time settings directly though the remote control. To enter a two-digit channel, press the two digits. To enter a three-digit channel, press and hold the first digit, release, then add the second two. For example: to tune to channel 123, press and hold 1, release, press 2, then 3.

INPUT In TV/VCR mode, press to toggle through the available input sources (VIDEO 1, VIDEO 2, current channel).

ANTENNA Functions as TV/VCR button in VCR mode and TV/receiver button in SAT•CABLE mode.

REVERSE Rewinds the tape when the TV/VCR is stopped. Searches the picture in reverse during playback.

PLAY Plays a tape.

FORWARD Fast forwards the tape when the TV/VCR is stopped. Searches the picture in forward motion during playback.

REC•VCR+ Starts TV/VCR recording. Used for express recording. When in the GUIDE Plus+ system, pressing this button brings up the one-button recording screen. When not in the GUIDE Plus+ system, pressing this button will record the program you are currently viewing; however, if you have set a GUIDE Plus+ system-timed recording, that recording will interrupt the TV/VCR recording.

STOP Stops functions such as record, play, rewind, fast forward, and pause.

PAUSE Pauses the tape during playback. Pauses the tape during recording to prevent recording of unwanted scenes.

TRACKING - and + (Tracking Down and Up) Lets you manually adjust tracking to reduce the streaks that may appear in the picture during playback.

EDIT Pressing EDIT during playback pauses the tape. Press again to resume playback. Also, if FR. ADV is pressed, the tape advances frame-by-frame. One way to resume playback is to press EDIT.

FR. ADV (Frame Advance) Fast forwards the tape through a commercial when a tape is playing. Advances the tape one video frame at a time when the tape is paused.

USING THE INPUT BUTTON

Use the INPUT button to toggle through the available input sources and view the component you have connected to the TV/VCR.

1.Press TV to place the remote in TV mode. Make sure that the component you want to view is turned on.

2.Press INPUT to tune to an available input source.

3.Continue to press INPUT to scroll through the input sources.

Modes of Operation

Because this universal remote can control several different components (cable box, another VCR, etc.), it uses operational modes triggered by the component buttons. For example if you want the remote to control the TV/VCR, you would press the TV button to put the remote into TV mode before you could control the TV/VCR.

1 7