SUB - ZERO I N T E G R AT E D USE & C ARE
L I G H T I N G INFORMATION
Before replacing the light bulbs discon- nect power by removing the power cord from the appliance inlet. Wear protective gloves when handling bulbs.
TOP COMPARTMENT LIGHTING
The top compartment of the Integrated tall unit contains standard
To replace the light bulbs in the top compart- ment, you’ll need to remove the light shield. Place your hands under the light shield and release the two clips on the back of the light shield, then lift up and slide back slowly until the key slots on the side of the light shield drop past the mounting studs in the side walls. Remove the light shield. The bulbs are now accessible. Refer to the illustration below.
Replace the bulbs and follow the reverse steps to reposition the light shield.
DRAWER COMPARTMENT LIGHTING
Each drawer compartment of Integrated tall and base units have a standard
To replace the light bulb in a drawer compart- ment, you must pull the drawer out to its full extension or remove the drawer completely.
Refer to Drawer Removal on page 14.
Remove the bulb by unscrewing it from its socket. Replace the bulb and follow the reverse steps to reinstall the drawer.
Light Shield | Locking Clip |
Light bulb location in top compartment
Drawer Compartment |
Lighting |
Light bulb location in drawer compartment
18