T R O U B L E S H O OT I N G G U I D E
T R O U B L E S H O OT I N G
If your Integrated unit is not operating properly, use the following troubleshooting guide before calling your
The word SERVICE flashes in the LCD display on the control panel
This may indicate that the condenser needs cleaning. Follow the Condenser Cleaning procedure outlined on page 17.
Turn the unit off with the 
key pad and then restart by depressing the key pad again. If SERVICE flashes again, contact your
The words SERVICE and ICE flash in the LCD display on the control panel
Turn the unit off with the 
key pad and then restart by depressing the key pad again. If SERVICE and ICE flash again, contact your
The refrigerator/freezer is not operating
Is there electrical power to the unit (power outage)?
Is the home circuit breaker or fuse off?
Is the refrigerator/freezer control on?
Is the condenser area clean?
If the unit is still not running, it may be in defrost mode; wait 30 minutes to see if the unit will restart.
The refrigerator/freezer is warmer than usual
Is the control set properly?
Is the condenser area clean?
Has the door or a drawer been left open for an extended period? Be sure that food is not obstructing proper door or drawer closing.
Has a large quantity of food been added recently?
The refrigerator/freezer runs for long periods of time
Is the condenser area clean?
Has the door or a drawer been left open for an extended period? Be sure that food is not obstructing proper door or drawer closing.
Has a large quantity of food been added recently?
On hot days and in warm room tempera- tures, the compressor runs longer.
Model ICB700TFI uses a variable speed compressor and is designed to run continuously. This cooling method actually uses less energy than a typical
The refrigerator/freezer is frosted up
Has the door or a drawer been left open for an extended period? Be sure that food is not obstructing proper door or drawer closing.
Are the door and drawers closing and sealing properly?
20
