SUB - ZERO I N T E G R AT E D USE & C ARE
TO P CO M PA RT M E N T STORAGE
ADJUSTABLE GLASS SHELVES
You can remove or adjust the tempered glass shelves of the Integrated tall units. First, tilt the shelf up at the front, then lift it up and out of the tracks on the rear wall of the refrigerator or freezer, as shown in the illustration below.
To clear the door shelves, lift and pivot the end of the glass shelf nearest the door upward, and remove.
To replace the glass shelves, select the desired shelf height. Then, with the front of the shelf raised slightly, place the shelf in the tracks on the rear wall of the unit. Lower the front of the shelf until it locks into position.
Always exercise care when handling the glass shelves to prevent breakage or scratching the interior.
STATIONARY SHELF
The stationary glass shelf, with 686 mm wide tall units and Model ICB736TR, is packed on the top shelf of your Integrated tall unit. Place this shelf on the bottom portion of the top compartment with the beveled edge of the shelf support facing front. When installed properly, the rear support legs will space the shelf away from the back wall to ensure an even flow of air through the unit.
DOOR SHELVES
The door shelves and dairy compartment of Integrated tall units are adjustable within the guides of the door liner.
To remove door shelves or the dairy compart- ment, lift straight up and out from the bottom as shown in the illustration below.
To replace, select a desired position and slide the door shelf or dairy compartment down into the guides.
Adjustable glass shelf removal | Door shelf removal |
13
