RCA T19067, T13066 manual Index Search, To Select Scan and Play Index Playback

OPERATING INSTRUCTIONS

Index Search

The TV/VCR automatically records index marks on the tape each time you begin recording. During playback you can locate the program you want to play by the number of index marks. Your TV/VCR has two index playback features. You can select a specific index number or search by scan and play.

To Select Scan and Play Index Playback:

1.Insert the pre-recorded tape and press STOP.

2.Press SEARCH on the remote to display the Index Search screen.

3.Press FORWARD on the remote to scan forward or REW to scan in reverse.

When the TV/VCR locates an index mark, it will stop and play a few seconds of the program following the mark.

4.At any time during the search, press PLAY to stop searching and begin playback, or press STOP to stop the search.

If the beginning or end of the tape is reached during the search, the message “End of tape” appears.

To Select a Specific Index Number for Index Playback:

1.Insert the pre-recorded tape and press STOP.

2.Press SEARCH on the remote to display the Index Search screen.

INDEX SEARCH

Press REW or FF to begin search

OR Enter a specific index number

--

3.Use the number buttons (0-9) on the remote to enter the number of the index mark for which you want the TV/VCR to search.

4.Press FORWARD to search forward or REVERSE to search in reverse.

When the TV/VCR locates the index mark, it will begin playback.

When using index playback, the following index marks may be skipped by the TV/VCR:

•The mark closest to the current location on the tape.

•The mark at the beginning of a recorded segment that is five minutes or less.

•The mark at the beginning of the tape.

INDEX SEARCH

Press REW or FF to begin search

OR Enter a specific Index Number

--

INDEX SEARCH

Scanning...

Index Number

01

Press STOP to cancel

2 6