RCA T13066, T19067 manual Copying and Editing Tapes, To check or clear a timer recording

OPERATING INSTRUCTIONS

•If you turn the TV/VCR off, the TIMER indicator will flash if there is no cassette in the TV/VCR or the safety tab is missing from the cassette.

10.If using a cable box, turn it on and tune it to the channel you want to record before time for the recording to begin.

To check or clear a timer recording:

1.Press MENU on the remote to display the TV/VCR Main Menu.

2.Press 3 to display the Timer Recordings menu.

3.Press 2 to Review Existing Programs.

4.Press CLEAR to erase a program.

5.Press MENU to review the next program in sequence.

6.After you have reviewed all of your programs press MENU to exit.

To stop a timer recording:

•If it is a TV/VCR-timed recording, press and hold STOP/EJECT on the TV/VCR or STOP on the remote. A timer program in progress will be stopped. Only today’s recording of a Daily, Weekdays, or Weekly program is canceled. The Daily, Weekdays, or Weekly program remains in the timer.

•If it is a GUIDE Plus+ system-timed recording, you cannot stop it using the remote or front panel. You must cancel the timer through the GUIDE Plus+ system.

COPYING AND EDITING TAPES

Use another VCR or camcorder as the playback VCR and the TV/VCR as the recording VCR.

1.Turn on the VCR or camcorder and the TV/VCR.

2.Press 00 on TV/VCR’s remote to select the line input (VIDEO 1 or VIDEO 2). Pressing 00 once tunes the TV/VCR to the AUDIO/VIDEO 1 input jacks on the rear of the TV/VCR. Pressing 00 twice tunes the TV/VCR to the AUDIO/VIDEO 2 input jacks on the front of the TV/VCR.

3.Insert the tape you want to copy into the playback VCR or camcorder. Insert a blank tape with safety tab intact into the TV/VCR.

4.Start the playback VCR or camcorder playing. If the tape was not recorded on the playback VCR, streaks may appear and you may need to adjust the tracking. When you reach the place you want to begin copying, place the playback VCR or camcorder in play pause.

5.Press RECORD, then PAUSE on the TV/VCR’s remote.

TV/VCR MAIN MENU

1Screen

2 Time

3 Timer Recordings

4 Parental Controls

TIMER RECORDINGs

5 Setup

6 GUIDE Plus+ Menu

1 Create a New Program

2 Review Existing Programs

0 Exit

Program 1 (One Time)

Channel	08
Start Time	02:10 PM
End Time	03:35 PM
Start Date	02/12/00 Sat
Tape Speed	SLP

Press CLEAR to erase

Press MENU for next prog

VIDEO1

3 1