Tip of the Line Does The Cutting

Right

Line Crowded Into Work Area

Wrong

SCALPING -- The scalping technique re- moves unwanted vegetationdown to the ground. Hold the bottom of the trimmer head about 3 inches (8 cm) above the ground and at an angle. Allow the tip of the line to strike the ground around trees, posts, monuments, etc. This technique increases line wear.

Scalping

S The line will easily remove grass and weeds from around walls, fences, trees and flower beds, but it also can cut the tender bark of trees or shrubs and scar fences. To help avoid damage especially to delicate vegetation or trees with tender bark, shorten line to 4--5 inches (10--13 cm) and use at less than full throttle.

SFor trimming or scalping, use less than full throttle to increase line life and decrease head wear, especially:

S During light duty cutting.

S Near objects around which the line can

wrap such as small posts, trees or fence wire.

SFor mowing or sweeping, use full throttle for

a good clean job.

TRIMMING -- Hold the bottom of the trimmer head about 3 inches (8 cm) above the ground and at an angle. Allow only the tip of the line to make contact. Do not force trimmer line into work area.

Trimming

3 inches (8 cm) above ground

MOWING -- Your trimmer is ideal for mowing in places conventional lawn mowers cannot reach. In the mowing position, keep the line parallel to the ground. Avoid pressing the head into the ground as this can scalp the ground and damage the tool.

Mowing

SWEEPING -- The fanning action of the rotat- ing line can be used for a quick and easy clean up. Keep the line parallel to and above the surfaces being swept and move the tool from side to side.

Sweeping

MAINTENANCE

WARNING: Disconnect the spark plug before performing maintenance except for carburetor adjustments.

HELPFUL TIP

IMPORTANT: Have all

repairs other than the rec- ommended maintenance described in the instruction manual performed by an authorized service dealer.

If any dealer other than an authorized service dealer performs work on the product, WEED EATER may not pay for repairs under warranty. It is your re- sponsibility to maintain and perform general maintenance.

CHECK FOR LOOSE

FASTENERS AND PARTS

SSpark Plug Boot S Air Filter

S Housing Screws

S Assist Handle Screws S Debris Shield

CHECK FOR DAMAGED OR

WORN PARTS

Contact an authorized service dealer for re- placement of damaged or worn parts.

SSTOP Switch -- Ensure STOP switch func- tions properly by pushing and holding the switch in the STOP position. Make sure en-

gine stops. Restart engine and continue.

SFuel Tank -- Discontinue use of unit if fuel tank shows signs of damage or leaks.

SDebris Shield -- Discontinue use of unit if debris shield is damaged.

INSPECT AND CLEAN UNIT AND LABELS

S After each use, inspect complete unit for loose or damaged parts. Clean the unit and labels using a damp cloth with a mild deter- gent.

SWipe off unit with a clean dry cloth.

CLEAN AIR FILTER

A dirty air filter decreases engine perform- ance and increases fuel consumption and harmful emissions. Always clean after every 5 hours of operation.

9

Page 8 Page 10
Page 9
Image 9
Weed Eater FX26SC Maintenance, Check for Loose Fasteners and Parts, Check for Damaged or Worn Parts, Clean AIR Filter
Page 8 Page 10

FX26SC, 545186796 specifications

The Weed Eater FX26SC is a versatile and powerful string trimmer designed for homeowners and landscaping professionals who demand performance and reliability. With its 26cc engine, this trimmer delivers ample power to tackle even the toughest grass and weeds, making it an essential tool for maintaining a pristine yard or garden.

One of the standout features of the FX26SC is its ease of use. The trimmer is equipped with a lightweight design, which allows for extended use without causing fatigue. Its balanced weight distribution enhances maneuverability, making it easier to trim around flower beds, fences, and other obstacles in your yard. The ergonomic handle is designed for comfort, providing a secure grip that reduces strain on the hands during operation.

The FX26SC features a dual-line system that enables efficient cutting. This system allows for a wider cutting path, allowing users to finish jobs more quickly while achieving a clean, precise cut. The trimmer also features a bump feed head that automatically advances the line when you tap it on the ground, minimizing downtime and ensuring continuous operation.

In terms of technology, the FX26SC comes with a reliable 2-stroke engine that provides a strong power-to-weight ratio. This engine technology is designed for lower emissions, making it an environmentally friendly choice for users who want to minimize their ecological footprint. The trimmer also features an easy-start system, which reduces the effort needed to start the engine, allowing users to get straight to work without the hassle of cumbersome starting procedures.

Its durable construction ensures that the Weed Eater FX26SC can withstand the rigors of regular use. The frame is designed to resist wear and tear from tough outdoor conditions, prolonging the life of the trimmer. Maintenance is straightforward, with easily accessible parts that make it simple to perform routine checks and repairs.

Overall, the Weed Eater FX26SC is more than just a string trimmer; it's a reliable outdoor tool loaded with features and technologies that enhance performance, comfort, and efficiency. Whether you're a homeowner looking to keep your lawn in check or a professional landscaper needing a dependable tool, the FX26SC meets a variety of cutting needs with ease and precision.
Top Page Image Contents