EDGING -- Adjust trimmer to the edging posi- tion (see TWIST AND EDGE section). Allow only the tip of the line to make contact. Do not

force trimmer line into work area.

Edging

MAINTENANCE

WARNING: Disconnect the spark plug before performing maintenance except for carburetor adjustments.

HELPFUL TIP

IMPORTANT: Have all

repairs other than the rec- ommended maintenance described in the instruction manual performed by an authorized service dealer.

If any dealer other than an authorized service dealer performs work on the product, WEED EATER may not pay for repairs under warranty. It is your re- sponsibility to maintain and perform general maintenance.

CHECK FOR LOOSE

FASTENERS AND PARTS

SSpark Plug Boot S Air Filter

S Housing Screws

S Assist Handle Screws S Debris Shield

CHECK FOR DAMAGED OR WORN PARTS

Contact an authorized service dealer for re- placement of damaged or worn parts.

SSTOP Switch -- Ensure STOP switch func- tions properly by pushing and holding the switch in the STOP position. Make sure en-

gine stops. Restart engine and continue.

SFuel Tank -- Discontinue use of unit if fuel tank shows signs of damage or leaks.

SDebris Shield -- Discontinue use of unit if debris shield is damaged.

INSPECT AND CLEAN UNIT AND LABELS

S After each use, inspect complete unit for loose or damaged parts. Clean the unit and labels using a damp cloth with a mild deter- gent.

SWipe off unit with a clean dry cloth.

CLEAN AIR FILTER

A dirty air filter decreases engine perform- ance and increases fuel consumption and harmful emissions. Always clean after every 5 hours of operation.

1.Clean the air filter cover and the area around it to keep dirt from falling into the carburetor chamber when the cover is opened.

2.Open air filter cover by pushing button

(see illustration). Remove air filter. NOTE: To avoid creating a fire hazard or producing harmful evaporative emissions, do not clean filter in gasoline or other flammable solvent.

3.Wash the filter in soap and water.

4.Allow filter to dry.

5.Replace air filter and close cover.

Button

Air Filter

Air Filter Cover

MUFFLER AND SPARK ARREST- ING SCREEN

WARNING: The muffler on this prod- uct contains chemicals known to the State of California to cause cancer.

As your unit is used, carbon deposits build up on the muffler and spark arresting screen. For normal homeowner use, however, the muffler and spark arresting screen will not re- quire any service. After 50 hours of use, we recommend that your muffler be serviced or replaced by your authorized service dealer.

REPLACE SPARK PLUG

Replace the spark plug each year to ensure the engine starts easier and runs better. Set spark plug gap at 0.025 inch (0.6 mm). Igni- tion timing is fixed and nonadjustable.

1.Twist, then pull off spark plug boot.

2.Remove spark plug from cylinder and dis- card.

3.Replace with Champion RCJ-6Y spark plug and tighten securely with a 3/4 inch (19 mm) socket wrench.

4.Reinstall the spark plug boot.

9

Page 8 Page 10
Page 9
Image 9
Weed Eater 545186833 instruction manual Maintenance
Page 8 Page 10

545186833 specifications

The Weed Eater 545186833 is an exceptional tool designed for homeowners and gardening enthusiasts seeking an efficient and reliable solution for lawn maintenance. This weed eater combines a powerful motor with lightweight design, making it suitable for both residential and commercial use.

One of the standout features of the Weed Eater 545186833 is its powerful 25cc two-cycle engine. This engine not only delivers a strong performance but also ensures that tough weeds and overgrown grass can be handled with ease. The engine is designed to provide a robust power-to-weight ratio, allowing for longer operation times without the fatigue often associated with heavier tools.

Ergonomics play a significant role in the design of the Weed Eater 545186833. It comes with a comfortable, adjustable handle that allows users to find the optimal position for trimming. This reduces strain on the arms and back, making it easier to work for extended periods. The lightweight design enhances maneuverability, enabling users to reach tight spots and navigate around landscaping features effectively.

The Weed Eater 545186833 features a dual-line bump feed head, which simplifies the process of reloading the cutting string. This technology allows users to release new line with a simple bump on the ground, ensuring that you can continue working without interruptions. The cutting width is an impressive 16 inches, allowing for quick trimming over larger areas, thus making the job more efficient.

Additionally, this model incorporates a straight shaft, which not only improves balance but also increases reach for tackling taller weeds. The durability of the materials used in its construction is evident, promising long-lasting performance even in tough environments.

Maintenance is straightforward with the Weed Eater 545186833 due to its easy-access air filter and spark plug, which allow for quick inspections and replacements. This feature ensures that your equipment remains in top shape throughout the seasons, reducing downtime.

In summary, the Weed Eater 545186833 packs robust performance, ergonomic design, and user-friendly technology into a lightweight package. Its features and characteristics make it a standout choice for anyone looking to maintain a pristine lawn or garden effortlessly. With this reliable tool at your disposal, tackling even the most stubborn weeds becomes a hassle-free task.
Top Page Image Contents