ASSEMBLY

WARNING: Stop engine and be sure the impeller blades have stopped turning be- fore opening the vacuum inlet door or at- tempting to insert or remove the vacuum or blower tubes. The rotating blades can cause serious injury. Always disconnect the spark plug before performing maintenance or ac- cessing movable parts.

WARNING: If you receive your unit assembled, check each step to insure your unit is properly assembled and all fasteners are secure. Follow all safety information in the manual and on the unit.

DA standard screwdriver is required for as- sembly.

BLOWER TUBE ASSEMBLY

1.Align the rib on the upper blower tube with the groove in the blower outlet; slide the tube into place.

NOTE: Knob must be loose enough to allow blower tube to be inserted in blower outlet. Loos- en knob by turning counterclockwise.

Blower Outlet

Groove Rib

2.Secure the tube by turning the knob clock- wise.

3.Align the slots on the lower blower tube with the tabs on the upper blower tube.

Upper Blower

Tube

Lower Blower

Tube

Tab

Slot

4.Slide the lower blower tube onto the upper blower tube.

5.Turn the lower blower tube clockwise until a click is felt to secure the lower blower tube to the upper blower tube.

NOTE: When the upper and lower blower tubes are assembled together properly, the arrows on both tubes will be aligned.

6.To remove the tubes, turn the knob coun- terclockwise to loosen the tubes; remove the tubes.

HIGH-SPEED NOZZLE ASSEMBLY

When greater air speed is desired, use the high--speed nozzle.

1.Align the slots on the nozzle with the tabs on the lower blower tube.

High--Speed

Nozzle

Lower Blower Tab

TubeSlot

2.Slide the nozzle onto the lower blower tube.

3.Turn the nozzle clockwise until a click is felt to secure the nozzle to the lower blow- er tube.

VACUUM BAG ASSEMBLY

1.Open the zipper on the vacuum bag and insert the elbow tube.

2.Push the small end of the elbow tube through the small opening in the bag.

Elbow

TubeRib

Zipper Opening

Small Opening

NOTE: Make sure edge of the small opening is flush against the flared area of the elbow tube, and the rib on the elbow tube is on the bottom.

3.Close the zipper on the bag. Make sure the zipper is closed completely.

4.Remove blower tubes from engine.

Rib

Groove

5.Insert the elbow tube into the blower outlet. Make sure elbow tube rib is aligned with the blower outlet groove.

6.Turn knob clockwise to secure elbow tube.

VACUUM TUBE ASSEMBLY

WARNING: Stop engine and be sure the impeller blades have stopped turning be- fore opening the vacuum inlet door or at- tempting to insert or remove the vacuum or

-- 5 --

Page 4 Page 6
Page 5
Image 5
Weed Eater 115351027 Blower Tube Assembly, HIGH-SPEED Nozzle Assembly, Vacuum BAG Assembly, Vacuum Tube Assembly
Page 4 Page 6

115351027, 952711922 specifications

The Weed Eater 115351027 (also referred to by some users as the 952711922) is a standout when it comes to lawn maintenance and gardening tools. Specifically designed to handle the rigors of trimming and edging, this model is perfect for homeowners and professional landscapers alike.

One of the prominent features of the Weed Eater 115351027 is its powerful engine. Boasting a robust 25cc 2-cycle engine, this unit provides sufficient power to tackle even the toughest weeds and grass. The engine is capable of delivering a high RPM, ensuring that users can cover more ground in less time and achieve a pristine finish. Furthermore, it’s engineered for easy starting, featuring an advanced primer bulb and a user-friendly recoil start system, allowing you to get to work without frustration.

The trimmer's design is also noteworthy. It features an ergonomic handle to minimize fatigue during extended use. The adjustable shaft telescopes, accommodating users of various heights for enhanced comfort and control. Additionally, the lightweight construction of the Weed Eater makes it easy to maneuver, reducing the strain on your arms and back.

In terms of technology, the Weed Eater incorporates a 16-inch cutting width equipped with a dual-line bump feed head. This innovative system allows for quick line advancement simply by tapping the head on the ground. This feature means less downtime for users, allowing for efficient trimming and consistent results. The trimmer is compatible with various line gauges, so users can select the appropriate line for their specific needs, optimizing performance based on the type of vegetation they’re tackling.

The Weed Eater 115351027 is designed with durability in mind. Its robust build quality can withstand harsh outdoor conditions, ensuring longevity. The materials used are resistant to wear, and the trimmer is easy to maintain, with accessible air filters and spark plugs that simplify routine service tasks.

Overall, the Weed Eater 115351027, 952711922 combines power, ease of use, and durability, making it a top choice for anyone looking to achieve a well-groomed lawn effortlessly. With its impressive features and user-friendly technologies, this trimmer is geared toward providing exceptional performance and reliability for all your landscaping needs.
Top Page Image Contents