CLEAN AIR FILTER

A dirty air filter decreases engine perform- ance and increases fuel consumption and harmful emissions. Always clean or replace air filter after every 5 hours of operation or yearly, whichever comes first.

Button

Air Filter

Cover

Air Filter

Cleaning the air filter:

1.Clean the cover and the area around it to keep debris from falling into the carburetor chamber when the cover is removed.

NOTE: Move choke lever to RUN position before opening air filter cover.

2.Open air filter cover by pushing button (see illustration). Remove air filter.

NOTE: Do not clean filter in gasoline or other flammable solvent. Doing so can create a fire hazard or produce harmful evaporative emis- sions.

3.Wash the filter in soap and water.

4.Allow filter to dry.

5.Apply a few drops of oil to the filter; squeeze filter to distribute oil.

6.Replace parts.

REPLACE SPARK PLUG

Replace spark plug each year to ensure the engine starts easier and runs better. Set spark plug gap at 0.025 inch (0.6 mm). Igni- tion timing is fixed, nonadjustable.

NOTE: This spark ignition system complies with the Canadian standard ICES--002.

1.Twist, then pull off spark plug boot.

2.Remove spark plug from cylinder and dis- card.

3.Replace with Champion RCJ-6Y spark plug and tighten securely with a 3/4 inch (19 mm) socket wrench.

4.Reinstall the spark plug boot.

REPLACE FUEL FILTER

To replace fuel filter, drain unit by running it dry of fuel, then remove fuel cap/retainer assem- bly from tank. Pull filter from tank and remove it from the fuel line. Install new fuel filter on fuel line; reinstall parts.

Fuel Filter

Fuel Line

CHECK MUFFLER MOUNTING SCREWS

Once each year, ensure muffler mounting screws are tightened securely to prevent damage.

Muffler

Mounting

Screw

MUFFLER AND SPARK ARREST- ING SCREEN

WARNING: The muffler on this prod- uct contains chemicals known to the State of California to cause cancer.

NOTE: THE SPARK ARRESTING SCREEN ON THIS UNIT IS NOT SERVICEABLE.

For normal homeowner use, the muffler and spark arresting screen will not require replace- ment. After 50 hours of use, we recommend that your muffler be replaced by your authorized service dealer.

CARBURETOR IDLE SPEED ADJUSTMENT

The carburetor has been carefully set at the factory. Adjustments may be necessary if you notice any of the following conditions:

S Engine will not idle when the throttle is re- leased.

To adjust idle speed:

Allow engine to idle. Adjust speed until engine runs without stalling (idle speed too slow).

S Turn idle speed screw clockwise to in- crease engine speed if engine stalls or dies.

STurn idle speed screw counterclockwise to decrease engine speed.

Idle Speed Screw

Air

Filter

Cover

If you require further assistance or are unsure about performing this procedure, contact an authorized service dealer or call 1--800--554--6723.

-- 10 --

Page 9 Page 11
Page 10
Image 10
Weed Eater 952711922, 115351027 Clean AIR Filter, Replace Spark Plug, Replace Fuel Filter, Check Muffler Mounting Screws
Page 9 Page 11

115351027, 952711922 specifications

The Weed Eater 115351027 (also referred to by some users as the 952711922) is a standout when it comes to lawn maintenance and gardening tools. Specifically designed to handle the rigors of trimming and edging, this model is perfect for homeowners and professional landscapers alike.

One of the prominent features of the Weed Eater 115351027 is its powerful engine. Boasting a robust 25cc 2-cycle engine, this unit provides sufficient power to tackle even the toughest weeds and grass. The engine is capable of delivering a high RPM, ensuring that users can cover more ground in less time and achieve a pristine finish. Furthermore, it’s engineered for easy starting, featuring an advanced primer bulb and a user-friendly recoil start system, allowing you to get to work without frustration.

The trimmer's design is also noteworthy. It features an ergonomic handle to minimize fatigue during extended use. The adjustable shaft telescopes, accommodating users of various heights for enhanced comfort and control. Additionally, the lightweight construction of the Weed Eater makes it easy to maneuver, reducing the strain on your arms and back.

In terms of technology, the Weed Eater incorporates a 16-inch cutting width equipped with a dual-line bump feed head. This innovative system allows for quick line advancement simply by tapping the head on the ground. This feature means less downtime for users, allowing for efficient trimming and consistent results. The trimmer is compatible with various line gauges, so users can select the appropriate line for their specific needs, optimizing performance based on the type of vegetation they’re tackling.

The Weed Eater 115351027 is designed with durability in mind. Its robust build quality can withstand harsh outdoor conditions, ensuring longevity. The materials used are resistant to wear, and the trimmer is easy to maintain, with accessible air filters and spark plugs that simplify routine service tasks.

Overall, the Weed Eater 115351027, 952711922 combines power, ease of use, and durability, making it a top choice for anyone looking to achieve a well-groomed lawn effortlessly. With its impressive features and user-friendly technologies, this trimmer is geared toward providing exceptional performance and reliability for all your landscaping needs.
Top Page Image Contents