SAFETY RULES

WARNING: Failure to follow all Safety Rules and Precautions can result in serious injury.

KNOW YOUR UNIT

SRead your instruction manual carefully until you completely understand and can follow

all warnings and safety rules before operat- ing the unit.

DRestrict unit to users who understand and will follow all warnings and safety rules in this manual.

WARNING: Inspect the area before starting the unit. Remove all debris and hard objects such as rocks, glass, wire, etc. that can ricochet, be thrown, or otherwise cause injury or damage during operation.

DUse your unit as a blower for:

D Sweeping debris or grass clippings from driveways, sidewalks, patios, etc.

D Blowing grass clippings, straw, or leaves into piles, around joints, or between bricks.

PLAN AHEAD

DAlways wear eye protection when operating, servicing, or performing maintenance on unit. Wearing eye protection will help to prevent rocks or debris from being blown or ricochet- ing into eyes and face which can result in blindness and/or serious injury. Eye protec-

tion should be marked ANSI Z87.

D Always wear foot protection. Do not go barefoot or wear sandals.

DAlways wear respirator or face mask when

working with unit in dusty environments.

DSecure hair above shoulder length. Secure or remove jewelry, loose clothing, or cloth- ing with loosely hanging straps, ties, tas- sels, etc. They can be caught in moving

parts.

DDo not operate unit when you are tired, ill, up- set, or if you are under the influence of alco-

hol, drugs, or medication.

D Keep children, bystanders, and animals away from work area a minimum of 30 feet (10 meters) when starting or operating unit. Do not point blower nozzle in the direction of people or pets.

HANDLE FUEL WITH CAUTION, IT IS HIGHLY FLAMMABLE

DEliminate all sources of sparks or flame (in- cluding smoking, open flames, or work that can cause sparks) in the areas where fuel is

mixed, poured, or stored.

DMix and pour fuel in an outdoor area; store fuel in a cool, dry, well ventilated place; use an approved, marked container for all fuel pur-

poses.

DDo not smoke while handling fuel or while operating the unit.

DMake sure the unit is properly assembled

and in good operating condition.

DDo not fill fuel tank while engine is running. D Avoid spilling fuel or oil. Wipe up fuel spills be-

fore starting engine.

DMove at least 10 feet (3 meters) away from fuel and fueling site before starting engine.

D Always store gasoline in a container ap- proved for flammable liquids.

OPERATE YOUR UNIT SAFELY

D Inspect unit before each use for worn, loose, missing, or damaged parts. Do not use until unit is in proper working order.

D Keep outside surfaces free from oil and fuel.

DNever start or run engine inside a closed room, building or other unventilated area.

Breathing exhaust fumes can kill.

D To avoid static electricity shock, do not wear rubber gloves or any other insulated gloves while operating unit.

D Do not set unit on any surface except a clean, hard area while engine is running. Debris such as gravel, sand, dust, grass, etc. could be picked up by the air intake and thrown out through discharge opening, damaging unit, property, or causing serious injury to bystanders or operator.

DAvoid dangerous environments. Do not use in unventilated areas or where explosive vapors or carbon monoxide build up could

be present.

DDo not overreach or use from unstable sur- faces such as ladders, trees, steep slopes, rooftops, etc. Keep firm footing and balance at all times.

D Never place objects inside the blower tubes; always direct the blowing debris away from people, animals, glass, and solid objects such as trees, automobiles, walls, etc. The force of air can cause rocks, dirt, or sticks to be thrown or to ricochet which can hurt people or animals, break glass, or cause other damage.

D Never run unit without the proper equip- ment attached. When using your unit as a blower, always install blower tube.

DCheck air intake opening and blower tube frequently, always with engine stopped and spark plug disconnected. Keep vents and discharge tubes free from debris which can accumulate and restrict proper air flow and

cause damage to the unit.

DNever use for spreading chemicals, fertiliz- ers, or other substances which may contain

toxic materials.

DTo avoid spreading fire, do not use near leaf or brush fires, fireplaces, barbecue pits,

ashtrays, etc.

DUse only for jobs explained in this manual.

MAINTAIN YOUR UNIT PROPERLY

D Have all maintenance other than the rec- ommended procedures described in the in- struction manual performed by an autho- rized service dealer.

D Disconnect spark plug before performing maintenance except for carburetor adjust- ments.

D Use only recommended WEED EATER parts; use of any other parts may void your warranty and cause damage to your unit.

-- 3 --

Page 3
Image 3
Weed Eater 952711937 instruction manual Safety Rules

952711937 specifications

The Weed Eater 952711937 is a versatile and reliable tool that has garnered attention among gardening enthusiasts and professionals alike. Known for its efficient performance and user-friendly design, this trimmer is an excellent choice for anyone looking to maintain a pristine garden or lawn.

One of the standout features of the Weed Eater 952711937 is its powerful 2-cycle engine. This engine delivers sufficient power to tackle the toughest weeds and overgrown grass, ensuring that users can cover large areas without the need for frequent breaks. The engine is designed for easy starting, which reduces frustration and saves time when beginning yard work.

The lightweight design of the Weed Eater 952711937 is another significant advantage. Weighing in at only a few pounds, it allows for easy maneuverability, making it ideal for longer gardening sessions without causing fatigue. The trimmer features an ergonomic handle that offers a comfortable grip, further enhancing the user experience.

A notable technology featured in this trimmer is the automatic line advance system. This system ensures that the cutting line is fed smoothly and consistently, reducing the need for manual adjustments and allowing for uninterrupted trimming. The line itself is designed for durability, providing longevity even when tackling dense vegetation.

The Weed Eater 952711937 also comes equipped with a versatile cutting head that can accommodate different types of line, enabling users to choose the best option based on their specific lawn care needs. This adaptability makes it suitable for both light trimming and heavy-duty weed clearance.

Customers appreciate the ease of maintenance that this model offers. With simple assembly and straightforward upkeep, the Weed Eater 952711937 is designed to ensure that users can quickly get back to their gardening tasks with minimal downtime.

In conclusion, the Weed Eater 952711937 is a robust and efficient trimmer that combines power, ease of use, and advanced technology. Its lightweight structure, powerful engine, and convenient features make it an ideal tool for anyone seeking to achieve a well-maintained yard. Whether you're a homeowner or a professional landscaper, this trimmer offers the reliability and performance needed to keep your outdoor spaces looking their best.