OPERATION
KNOW YOUR UNIT
READ THIS INSTRUCTION MANUAL AND SAFETY RULES BEFORE OPERATING YOUR UNIT. Compare the illustrations with your unit to familiarize yourself with the location of the various controls and adjustments. Save this manual for future reference.
Assist Handle
| Coupler | |
Trimmer | Recessed Plug | |
Head | ||
| ||
Shield | Cord Retainer | |
| ||
| Motor Housing | |
Line Limiter Blade | Trigger Switch | |
|
RECESSED PLUG
The RECESSED PLUG is where you at- tach your extension cord to the unit.
TRIGGER SWITCH
The TRIGGER SWITCH is used to turn on the unit. Squeeze the trigger switch to oper- ate the unit. Release to stop.
LINE LIMITER BLADE
The LINE LIMITER BLADE cuts the cutting line to the proper cutting length.
ASSIST HANDLE
The ASSIST HANDLE is used to help hold and guide the unit.
TRIMMER HEAD
The TRIMMER HEAD holds the cutting line and rotates during operation.
COUPLER
The COUPLER enables optional attach- ments to be installed on the unit.
OPERATING INSTRUCTIONS
Use only a voltage supply as specified on your unit.
SELECT AN EXTENSION CORD
Extension Cord Gauge Chart
Length of Cord | Gauge | |
25 | Ft. (7.5 m) | 18 Gauge |
50 | Ft. (15 m) | 16 Gauge |
100 Ft. (30 m) | 14 Gauge | |
|
|
|
Extension cords are available for this unit.
ATTACH THE EXTENSION
CORD TO YOUR UNIT
Make a loop in your extension cord and attach the cord as shown. Ensure the plug and cord are firmly and fully engaged.
Cord Retainer
Extension Cord 
Recessed Plug on Unit
BEFORE STARTING UNIT
Be sure to read the electrical safety information in the safety rules section of this manual before you begin. If you do not understand the electrical safety information do not attempt to use your unit. Seek help from someone that does under- stand the information or call
WARNING: Always stop unit and dis- connect from power source before removing or installing attachments.
11
