CARTON CONTENTS
Check carton contents against the fol- lowing list. Refer to the illustrations in the OPERATION section of this manual.
SNozzle
SElbow with spacer ring S Extension Tube (4)
S Pivot Tube
S Adapter
S Adapter
release button S Goggles
Examine parts for damage. Do not use damaged parts.
If you need assistance or find parts mis- sing or damaged, please call
ASSEMBLY
Match the blower outlet on your unit to one of those illustrated. To begin assem- bly, go to the section which corresponds to your blower outlet.
Gas Units with Tabs
Tabs
Gas Units
with Slot
& Clamp
Ring
Electric |
|
Units | Tabs |
with Tabs |
Electric Units
with
Tube Release
Button
Tube Release Button
GAS UNITS WITH TABS
1.Stop engine and wait until impeller has completely stopped turning.
2.Remove all tubes or other attach- ments from unit.
3.Insert the notched end of the adapter into the elbow tube; push parts to- gether until the adapter snaps into place.
Blower Outlet |
|
| Elbow | ||||||||
|
|
|
| ||||||||
|
|
|
| Notched End | |||||||
|
| Groove |
|
|
|
| |||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
| Adapter | |||
|
|
|
|
|
|
|
| ||||
Electric
Units
with
Threads
4.Align the grooves on the adapter with the tabs inside the blower outlet.
5.Insert the adapter into the blower out- let; turn adapter clockwise until parts snap into place.
6.Proceed to ALL UNITS
SEMBLY.
GAS UNITS WITH SLOT &
CLAMP RING
1.Stop engine and wait until impeller has completely stopped turning.
2.Remove all tubes or other attach- ments from unit.
3.Thread spacer ring onto elbow threads until secure.
--3
