outlet. Do not change the equipment plug, extension cord receptacle, or extension cord plug in any way.
STo reduce risk of electrical shock, use extension cords specifically marked as suitable for outdoor appliances having electrical rating not less than the rating of unit. Cord must be marked with suffix
SDo not use multiple cords.
S Do not abuse cord. Never carry the unit by the extension cord or yank ex- tension cord to disconnect unit.
S Use cord retainer to prevent discon- nection of extension cord from unit.
See ATTACH THE EXTENSION CORD TO YOUR TRIMMER in the OPERATION
section.
SDo not use the unit if the switch does not turn the unit on and off properly. Repairs to the switch must be made
by your authorized service dealer.
SKeep the extension cord clear of oper-
ator and obstacles at all times. Do not expose cords to heat, oil, water, or sharp edges.
S To avoid the possibility of electric shock, avoid body contact with any grounded conductor, such as metal fences or pipes.
S Ground Fault Circuit Interrupter (GFCI) protection should be provided on circuit or outlet to be used. Recep- tacles are available having
UNIT SAFETY
S Inspect unit before use. Replace damaged parts. Make sure all han- dles, guards, and fasteners are in place and securely fastened. Parts that are damaged must be repaired or replaced by a authorized service dealer. These include head parts that are cracked, or chipped, guards, and any other part that is damaged.
SDo not repair unit yourself.
S Use only 0.065 in. (1.65 mm) diame-
ter recommended trimmer line (see
SERVICE AND ADJUSTMENTS). Never
use wire, rope, string, etc.
S Use specified trimmer spool. Make sure spool is properly installed and all parts are securely fastened.
S Use only Weed Eaterr replacement parts and accessories as recommen- ded.
CUTTING SAFETY
S Inspect area to be cut. Remove ob- jects (rocks, broken glass, nails, wire, string, etc.) which can be thrown or become entangled in cutting head.
SDo not overreach or stand on unsta- ble support. Keep firm footing and bal- ance.
S Keep the cutting head below waist level. Do not raise handles above your waist. Cutting head can come dangerously close to your body.
S Keep away from cutting head and spinning line.
S Use unit properly. Use only for trim- ming, scalping, and mowing. Do not force unit. It will do the job better and with less risk of injury at the rate for which it was designed.
SUse only in daylight or in good artificial light.
MAINTENANCE SAFETY
WARNING: Disconnect unit from the power supply before performing maintenance, or when changing trim- mer line.
S Maintain unit according to recom- mended procedures. Keep cutting line at proper length. Follow instruc- tions for changing trimmer line.
SHave all service and maintenance not explained in this manual performed by an authorized service dealer to avoid creating a hazard.
SNever douse or squirt the unit with wa- ter or any other liquid. Clean unit and decals with a damp sponge. Keep handles dry, clean, and free from oil
and grease.
S Keep the air vents clean and free of debris to avoid overheating the motor. Clean after each use.
TRANSPORTING AND STORAGE
SStop the unit and disconnect the pow-
er source when not in use.
SCarry the unit with motor stopped.
SStore the unit so the line limiter blade (on underside of shield) cannot cause
injury.
SStore unit indoors in a high, dry place out of the reach of children. Store unit unplugged.
3