Mowing

Sweeping

 

SWEEPING

The fanning action of the rotating line can be used for a quick and easy clean up. Keep the line parallel to and above the surfaces being swept and move the tool from side to side.

WARNING: Disconnect power source before performing maintenance.

GENERALRECOMMENDATIONS

The warranty on this unit does not cover items that have been subjected to operator abuse or negligence. To receive full value from the warranty, the operator must maintain unit as instructed in this manual. Various adjust- ments will need to be made periodically to properly maintain your unit.

BEFORE EACH USE

CHECK FOR LOOSE

FASTENERS AND PARTS

SHousing Screws S Assist Handle S Debris Shield

S Edge Guide

CHECK FOR DAMAGED OR

WORN PARTS

Contact an authorized service dealer for re- placement of damaged or worn parts.

S Trigger Switch -- Ensure switch functions properly by pressing and releasing the trig- ger switch. Make sure motor stops.

S Debris Shield -- Discontinue use of unit if debris shield is damaged.

AFTER EACH USE

INSPECT AND CLEAN UNIT AND DE- CALS

S After each use, inspect complete unit for loose or damaged parts. Clean the unit us- ing a damp cloth with a mild detergent.

S Wipe off unit with a clean dry cloth.

REPLACING THE LINE

1.Disconnect the unit from the power source.

2.Remove the spool by firmly pulling on the tap button.

3.Clean entire surface of hub and spool.

4.Replace with a pre-wound spool or cut a length of 30 feet of 0.065! (1.65 mm) di- ameter Weed Eaterr brand line. Use of heavier lines could overload and damage unit.

WARNING: Never use wire, rope, string, etc., which can break off and become a dangerous missile.

5.Insert one end of the line about 1/2 inch (1 cm) into the small hole inside the spool.

6.Wind the line evenly and tightly onto the spool. Wind in the direction of the arrow found on the spool.

7.Push the line into the notch, leaving 3 to 5 inches (7 -- 12 cm) unwound.

8.Insert the line into the exit hole in the hub as shown in the illustration.

9.Align the notch with the line exit hole.

10.Push the spool into the hub until it snaps into place.

11.Pull on the line extending outside the hub to release it from the notch; otherwise, the unit will not function properly.

Small

Hole

Spool

Tap

Button

Line in Notch

Hub

Line exit hole

 

7

Page 6 Page 8
Page 7
Image 7
Weed Eater RTE114, RTE113, 530086743 instruction manual Before Each USE, After Each USE
Page 6 Page 8

530086743, RTE114, RTE113 specifications

The Weed Eater RTE113 and RTE114, along with the part number 530086743, are powerful and reliable electric string trimmers designed for homeowners seeking an efficient solution for lawn maintenance. Both models stand out due to their user-friendly features, cutting-edge technologies, and robust design, making yard care tasks easier and more enjoyable.

The RTE113 and RTE114 trimmers are equipped with electric motors that provide consistent performance without the noise and emissions associated with gas-powered models. This makes them an eco-friendly choice for those looking to maintain their gardens while minimizing their environmental impact. The lightweight design of these trimmers ensures easy maneuverability, allowing users to navigate their yards with ease. Weighing in at just a few pounds, both models reduce user fatigue during prolonged use.

One of the standout features of the RTE113 and RTE114 is the automatic line feed system, which eliminates the need for manual line adjustments. This ensures that the cutting line advances effortlessly as needed, helping users maintain an uninterrupted work rhythm. The trimmers are equipped with a dual line system that allows for a wider cutting width, enabling faster trimming and reducing the overall time spent on yard work.

In terms of functionality, the trimmers feature an adjustable telescoping shaft that can accommodate different user heights, enhancing comfort during operation. Additionally, the ergonomic handle design provides a secure grip, making it easier to navigate around flower beds, fences, and other obstacles.

The RTE113 and RTE114 models also incorporate advanced technologies, such as a powerful 13-amp motor, which delivers ample cutting power for tackling tough weeds and grass. The 530086743 part number is crucial for users looking for replacement parts, ensuring that the trimmers can stay in top condition for years to come.

Overall, the Weed Eater RTE113 and RTE114, along with the 530086743 components, are outstanding choices for homeowners seeking effective and environmentally friendly lawn care solutions. Their combination of user-friendly features, powerful motors, and thoughtful design make them excellent tools for keeping your garden tidy and well-maintained.
Top Page Image Contents