SERVICE AND ADJUSTMENTS

REPLACING BATTERY (See Figs. 24 and 25)

WARNING: Do not short battery terminals by allowing a wrench or any other object to contact both terminals at the same time. Before connect- ing battery, remove metal bracelets, wristwatch bands, rings, etc.

Positive terminal must be connected first to prevent sparking from acci- dental grounding.

Lift seat pan to raised position.

Disconnect BLACK battery cable first then RED battery cable and carefully remove battery from tractor.

Install new battery with terminals in same position as old battery.

First connect RED battery cable to positive (+) terminal with hex bolt and keps nut as shown. Tighten securely. Slide terminal cover over terminal.

Connect BLACK grounding cable to negative (-) ter- minal with remaining hex bolt and keps nut. Tighten securely.

SEAT PAN

FIG. 24

TERMINAL

KEPS NUT

COVER

 

HEX

BOLT

POSITIVE (RED) CABLE

NEGATIVE (BLACK) CABLE

FIG. 25

TO REPLACE HEADLIGHT BULB

Raise hood.

Pull bulb holder out of the hole in the backside of the grill.

Replace bulb in holder and push bulb holder securely back into the hole in the backside of the grill.

Close hood.

INTERLOCKS AND RELAYS

Loose or damaged wiring may cause your tractor to run poorly, stop running, or prevent it from starting.

Check wiring. See electrical wiring diagram in the Repair Parts section.

TO REPLACE FUSE

Replace with 20 amp automotive-type plug-in fuse. The fuse holder is located behind the dash.

TO REMOVE HOOD AND GRILL ASSEMBLY (See Fig. 26)

Raise hood.

Unsnap headlight wire connector.

Stand in front of tractor. Grasp hood at sides, tilt toward engine and lift off of tractor.

To replace, reverse above procedure.

HOOD

HEADLIGHT WIRE

CONNECTOR

01536

FIG. 26

ENGINE

TO ADJUST THROTTLE CONTROL CABLE

The throttle control has been preset at the factory and adjustment should not be necessary. If adjustment is nec- essary, see engine manual.

TO ADJUST CHOKE CONTROL

The choke control has been preset at the factory and ad- justment should not be necessary. If adjustment is neces- sary, see engne manual.

TO ADJUST CARBURETOR

Your carburetor is not adjustable. If your engine does not operate properly due to suspected carburetor problems, take your tractor to an authorized service center for repair and/or adjustment.

23

Page 23
Image 23
Weed Eater 195013 To Replace Headlight Bulb, Interlocks and Relays, To Replace Fuse, To Adjust Throttle Control Cable

195013, WE13538LT specifications

The Weed Eater WE13538LT is a standout product in the landscaping and gardening industry, specifically designed for homeowners looking to maintain their lawns and gardens with ease and efficiency. This versatile string trimmer boasts a lightweight design coupled with powerful performance, making it an essential tool for any outdoor enthusiast.

One of the key features of the WE13538LT is its 38cc engine, which delivers ample power for trimming, edging, and clearing grass and weeds. This robust engine ensures that users can tackle tougher jobs without worrying about overheating or sacrificing performance. The 2-cycle gas-powered engine is designed for reliable operation, providing the perfect balance of power and weight. Its fuel-efficient design means that users can work longer without frequent refueling, making it ideal for large areas.

The trimmer's 17-inch cutting width is another notable feature, allowing for a wider swath with each pass. This reduces the amount of time spent trimming, making the overall gardening experience more efficient. The innovative bump head design makes it easy to reload the line, simply tapping the head on the ground automatically feeds more line to ensure uninterrupted trimming.

The WE13538LT is equipped with an ergonomic handle that enhances comfort during use. The adjustable handle allows users to customize their grip for optimal control and reduced fatigue, which is particularly important during extended periods of use. The lightweight design further contributes to user comfort, allowing for easy maneuverability without straining the arms or back.

Another significant feature is the inclusion of a straight shaft. This design not only provides improved reach, allowing users to access hard-to-reach areas but also enhances the tool's balance. The straight shaft is particularly advantageous when trimming along fences, walls, or flower beds, as it allows for precise cutting.

Safety is also a priority with the Weed Eater WE13538LT. It includes features like a protective shield that helps prevent debris from flying toward the operator, ensuring a safer working environment. Furthermore, the tool’s design incorporates low vibration technology, which minimizes user fatigue and enhances comfort during use.

In summary, the Weed Eater WE13538LT is a powerful and versatile string trimmer designed to meet the needs of homeowners. With its efficient 38cc engine, wide cutting width, ergonomic design, and safety features, it is an excellent choice for those looking to maintain a beautiful and pristine landscape effortlessly.