SERVICE AND ADJUSTMENTS

IDLER PULLEYS

MANDREL PULLEYS

FIG. 18

TO CHECK AND ADJUST BRAKE (See Fig. 19)

Your tractor is equipped with an adjustable brake system which is mounted on the right side of the transaxle.

If tractor requires more than five (5) feet to stop at highest speed in highest gear on a level, dry concrete or paved surface, then brake must be checked and adjusted.

TO CHECK BRAKE

Park tractor on a level, dry concrete or paved surface, depress clutch/brake pedal all the way down and en- gage parking brake.

Place gear shift lever in neutral (N) position.

The rear wheels must lock and skid when you try to manually push the tractor forward. If the rear wheels rotate, the brake needs to be adjusted or the pads need to be replaced.

TO ADJUST BRAKE

Depress clutch/brake pedal all the way down and en- gage parking brake.

Measure distance between brake operating arm and nut “A” on brake rod.

If distance is other than 1-1/2", loosen jam nut and turn nut “A” until distance becomes 1-1/2". Retighten jam nut against nut “A”.

Road test tractor for proper stopping distance as stated above. Readjust if necessary. If stopping distance is still greater than five (5) feet in highest gear, further maintenance is necessary. Replace brake pads or contact a qualified service center.

WITH PARKING BRAKE “ENGAGED”

1-1/2"

NUT “A”

JAM NUT

OPERATING ARM

TO REPLACE MOTION DRIVE BELT (See Fig. 20)

Park the tractor on level surface. Engage parking brake. For assistance, there is a belt installation guide decal on bottom side of left footrest.

BELT REMOVAL -

Remove mower (See “TO REMOVE MOWER” in this section of manual).

NOTE: Observe entire motion drive belt and position of all belt guides and keepers.

Remove belt from stationary idler and clutching idler.

Remove belt downward from around engine pulley.

Pull belt slack toward rear of tractor. Remove belt upwards from transaxle pulley by deflecting belt keep- ers.

Remove belt from center span keeper and pull belt away from tractor.

BELT INSTALLATION -

Carefully work new belt down between transaxle belt keepers and onto the input pulley.

Slide belt into the center span keeper.

Pull belt toward front of tractor and roll around the top groove of engine pulley.

Install belt through stationary idler and clutching idler.

Make sure belt is in all pulley grooves and inside all belt guides and keepers.

Install mower (See “TO INSTALL MOWER” in this sec- tion of manual).

ENGINE

PULLEY

CLUTCHING

IDLER

STATIONARY

IDLER

CENTER SPAN

KEEPER

TRANSAXLE

PULLEY

FIG. 20

FIG. 19

21

Page 21
Image 21
Weed Eater 195013 To Check and Adjust Brake See Fig, To Replace Motion Drive Belt See Fig, To Check Brake, To Adjust Brake

195013, WE13538LT specifications

The Weed Eater WE13538LT is a standout product in the landscaping and gardening industry, specifically designed for homeowners looking to maintain their lawns and gardens with ease and efficiency. This versatile string trimmer boasts a lightweight design coupled with powerful performance, making it an essential tool for any outdoor enthusiast.

One of the key features of the WE13538LT is its 38cc engine, which delivers ample power for trimming, edging, and clearing grass and weeds. This robust engine ensures that users can tackle tougher jobs without worrying about overheating or sacrificing performance. The 2-cycle gas-powered engine is designed for reliable operation, providing the perfect balance of power and weight. Its fuel-efficient design means that users can work longer without frequent refueling, making it ideal for large areas.

The trimmer's 17-inch cutting width is another notable feature, allowing for a wider swath with each pass. This reduces the amount of time spent trimming, making the overall gardening experience more efficient. The innovative bump head design makes it easy to reload the line, simply tapping the head on the ground automatically feeds more line to ensure uninterrupted trimming.

The WE13538LT is equipped with an ergonomic handle that enhances comfort during use. The adjustable handle allows users to customize their grip for optimal control and reduced fatigue, which is particularly important during extended periods of use. The lightweight design further contributes to user comfort, allowing for easy maneuverability without straining the arms or back.

Another significant feature is the inclusion of a straight shaft. This design not only provides improved reach, allowing users to access hard-to-reach areas but also enhances the tool's balance. The straight shaft is particularly advantageous when trimming along fences, walls, or flower beds, as it allows for precise cutting.

Safety is also a priority with the Weed Eater WE13538LT. It includes features like a protective shield that helps prevent debris from flying toward the operator, ensuring a safer working environment. Furthermore, the tool’s design incorporates low vibration technology, which minimizes user fatigue and enhances comfort during use.

In summary, the Weed Eater WE13538LT is a powerful and versatile string trimmer designed to meet the needs of homeowners. With its efficient 38cc engine, wide cutting width, ergonomic design, and safety features, it is an excellent choice for those looking to maintain a beautiful and pristine landscape effortlessly.