ASSEMBLY

TO PREPARE BATTERY

NOTE: Your battery must be charged be- fore you can start your lawn mower. Avoid charging battery in extremely hot or cold temperatures.

IMPORTANT: Do not store charger inside of motor or on top of battery.

WARNING: Use only the battery pack supplied with this mower. Type: XXXXXX. WARNING: Do not charge battery in rain or wet locations.

WARNING: Do not attempt to operate mower while battery is charging.

CAUTION: Only use battery charger approved by the manufacturer of your mower. Using a charger not approved by the manufacturer of your mower is hazard- ous, could damage your mower and void your warranty.

NOTE: The battery can be charged while in or out of the lawn mower.

1.Install battery as shown and tilt handle back to lock into position.

Battery

2.Remove the jack cover.

3.Plug the battery charger into the jack on the battery.

4.Plug the other end of the battery charger into a 120 volt A.C. outlet. The

red light on the charger will illuminate indicating that the charger is working and the battery is being charged.

When the battery is completely charged, the red light will go out and the green light will illuminate.

NOTE: It takes approximately 15 hours to charge a fully discharged battery. IMPORTANT: Battery should be charged after each use regardless of power level. Battery should always be stored in a fully charged state. This battery will not develop a charging memory.

WARNING: Do not store battery in tem- peratures lower than 32° F (0° C).

BATTERY CHARGER LED INDICATORS

Press the Battery Capacity Indicator Switch (on the back of the battery). The LED lights will indicate the current battery capacity as follows:

LIGHT MODE

BATTERY STATUS

RED

Battery is at 20% capacity,

 

charging is required

YELLOW

Battery is at 25% capacity,

 

will require charging soon

1 GREEN

Battery is at 45% capacity

2 GREEN

Battery is at 60% capacity

3 GREEN

Battery is at full capacity

Jack cover

Red Yellow Green Green Green

LED indicator lights Switch

Battery charger

6

Page 6
Image 6
Weed Eater WE20X, 438178, 96132005800 manual To Prepare Battery, Battery Charger LED Indicators

96132005800, 438178, WE20X specifications

The Weed Eater WE20X is a powerful and efficient outdoor tool designed for home gardeners and landscaping professionals alike. This versatile string trimmer is part of Weed Eater's commitment to quality and performance, featuring a lightweight design that makes it easy to maneuver in tight spaces and around obstacles.

One of the standout features of the WE20X is its robust electric motor. This motor delivers ample power to tackle tough overgrowth and weeds, ensuring that users can achieve a clean and well-manicured garden without the noise and fumes associated with gas-powered trimmers. With its quiet operation, the WE20X is an ideal choice for residential areas where noise restrictions may apply.

The WE20X incorporates advanced technologies that make it user-friendly. One such feature is the automatic line feed system, which ensures that the trimmer line is dispensed as needed, eliminating the hassle of manual adjustments. This system keeps the cutting line at an optimal length, allowing for uninterrupted trimming sessions.

Additionally, the WE20X boasts an adjustable handle that provides comfort and control during use. The ergonomic design helps reduce strain on the user’s arms and shoulders, making it suitable for extended use. This focus on comfort is complemented by a lightweight build, which enhances portability and reduces fatigue over long periods of operation.

Safety is also a priority with the WE20X. It features a protective shield that safeguards users from debris being kicked up during operation. This not only protects the user but also enhances overall performance by directing the trimmer's cutting action more effectively.

The Weed Eater WE20X is equipped with a dual line cutting system that enhances its cutting efficiency. This system provides twice the cutting action of single line models, allowing users to cover more ground in less time. Furthermore, the trimmer is designed with a versatile cutting head that can easily switch from trimming to edging, providing flexibility for a variety of landscaping tasks.

In summary, the Weed Eater WE20X stands out with its efficient electric motor, automatic line feed, ergonomic design, and dual line cutting system. These features combine to offer a reliable tool for anyone looking to maintain their outdoor space effectively and comfortably. Whether tackling unruly weeds or edging pathways, the WE20X is ready to help users achieve professional-looking results with ease.