OTHER OPTIONS Menu
OTHER OPTIONS
RECORD: CD
DYNAMIC: Max
5.1CH: Off
POWER: Direct
LANGUAGE: English
ENT | KEY=MAIN MENU | UP KEY=up |
+/– | KEY=change | DWN KEY=down |
This menu, accessed from the MAIN menu, provides access to a several miscellaneous settings as follows:
RECORD: Select a signal for the record out- puts by choosing one of the input sources.
DYNAMIC: steps through the three dynamic range settings available in digital modes:
•MAX (no compression/full dynamic range)
•MID (moderate compression)
•MIN (full compression/minimum dynamic range).
5.1CH: determines whether or 5.1 channel input is turned ON or OFF.
POWER: This setting determines how the
LANGUAGE: Selects one of the languages
for all of the
26
Change settings on the OTHER OPTIONS menu by highlighting the desired line using the UP/ DOWN buttons and using the +/– buttons to step through the available settings. To return to the MAIN menu, press the ENTER button. Press the MENU key on the remote to cancel the display and return to normal operation.
RESET Menu
Reset to factory default settings:
YES = ENT KEY
NO = DWN KEY
The FACTORY DEFAULT menu resets all sys- tem configuration settings to the factory sup- plied settings. This menu is reached by high- lighting the RESET line on the MAIN menu and pressing ENTER.
Press the ENTER button to reset all settings. Press the DOWN button to cancel this menu and return to the MAIN menu without restoring the default settings.
NOTE: Resetting to factory default settings will erase all stored settings including delay set- tings, speaker settings, balance settings, in- put settings and more. You will lose ALL system configuration settings. Be certain that you wish to do so before resetting the factory defaults.
ZONE 2 SETUP Menu
ZONE2 SETUP
SOURCE: CD
VOLUME SETUP: Variable
VOLUME: 20
ENT | KEY=MAIN MENU | UP KEY=up |
+/– | KEY=change | DWN KEY=down |
The ZONE 2 SETUP menu provides settings and configuration options related to the op- eration of Zone 2. This menu is reached by highlighting the ZONE 2 line on the MAIN menu and pressing ENTER.
SOURCE: the source selected for listening in Zone 2. Selecting the OFF option turns Zone 2 off.
VOLUME SETUP: configures the Zone 2 outputs for VARIABLE or FIXED volume levels. VARIABLE allows control of the volume settings in Zone 2 from the
VOLUME: In VARIABLE output mode, this line shows the current volume setting for Zone 2. In FIXED output mode, this use this setting to establish a permanent fixed output level for Zone 2.
Move the highlight to the desired line using the UP/DOWN buttons and use the +/– but- tons to adjust the volume level. To return to the MAIN menu, press the ENTER button. Press the MENU key on the remote to cancel the display and return to normal operation.