![](/images/new-backgrounds/1096775/9677539x1.webp)
SERVICE AND ADJUSTMENTS
WARNING: TO AVOID SERIOUS INJURY, BEFORE PERFORMING ANY SERVICE OR ADJUSTMENTS:
1.Depress clutch/brake pedal fully and set parking brake.
2.Place motion control lever in neutral (N) position.
3.Place deck clutch in “DISENGAGED” position.
4.Turn ignition key to “STOP” and remove key.
5.Make sure the blade and all moving parts have completely stopped.
6.Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug.
RIDING MOWER
TO REMOVE MOWER
1.Place deck clutch in “DISENGAGED" position.
2.Move mower height adjustment lift lever forward to lower mower to its lowest position.
3.Remove mandrel cover.
4.Remove pins holding left and right front mower suspension arms in place.
5.Remove bolt holding deck front to rear leveling rod in place.
6.Remove pin holding deck lift link arm in place.
7.Remove bolt holding deck side to side leveling rod in place.
8.Remove belt from around pulleys.
9.Slide deck out from under side of mower.
TO INSTALL MOWER
Install in reverse order following instructions in "TO REMOVE MOWER" section.
Deck Leveling
Side to Side
Rod Bolt
Mandrel Cover
Front Leveling Rod Bolt
Mower
Suspension
Arm Pin
Deck Lift Link Pin
20