MAINTENANCE
WARNING: Disconnect power source before performing maintenance.
GENERAL RECOMMENDATIONS
The warranty on this unit does not cover items that have been subjected to opera- tor abuse or negligence. To receive full value from the warranty, the operator must maintain unit as instructed in this manual. Various adjustments will need to be made periodically to properly maintain your unit.
BEFORE EACH USE
CHECK FOR LOOSE
FASTENERS AND PARTS
SInlet Cover S Blower Tube
CHECK FOR DAMAGED OR WORN PARTS
Contact your authorized service dealer for replacement of damaged or worn parts.
S ON/OFF Switch
S Inlet Cover
AFTER EACH USE
INSPECT AND CLEAN UNIT & LABELS Stop unit and unplug extension cord.
SAfter each use, inspect complete unit for loose or damaged parts. Clean the
unit using a damp cloth.
SWipe off unit with a clean dry cloth.
STORAGE
WARNING: Perform the following steps after each use:
SStop unit and disconnect from the pow- er source.
S Allow motor to cool before storing or transporting.
SStore unit with all guards in place. Posi-
tion unit so that any sharp object cannot accidentally cause injury.
S Store unit unplugged, well out of the reach of children.
SEASONAL STORAGE
Prepare unit for storage at the end of the season or if it will not be used for 30 days or more.
If your blower is to be stored for a period of time:
SStop unit and disconnect from the pow-
er source.
SClean the entire unit before lengthy stor-
age.
S Inspect the blower and blower tube. Close and make sure the cover is latched.
SClean air vents and air inlet of debris. S Store your unit and extension cord in a well ventilated area and covered, if pos- sible, to prevent dust and dirt accumula- tion. Do not cover with plastic. Plastic cannot breathe and may cause con- densation and eventual rust or corro-
sion.
S Check entire unit for loose screws. Re- place any damaged, worn, or broken parts.
7
