MAINTENANCE

TRACTOR

Always observe safety rules when performing any main- tenance.

BRAKE OPERATION

If tractor requires more than six (6) feet stopping distance at high speed in highest gear, then brake must be adjusted. (See “TO ADJUST BRAKE” in the Service and Adjustments section of this manual).

TIRES

Maintain proper air pressure in all tires (See “PRODUCT SPECIFICATIONS” section of this manual).

Keep tires free of gasoline, oil, or insect control chemi- cals which can harm rubber.

Avoid stumps, stones, deep ruts, sharp objects and other hazards that may cause tire damage.

NOTE: To seal tire punctures and prevent flat tires due to slow leaks, tire sealant may be purchased from your local parts dealer. Tire sealant also prevents tire dry rot and corrosion.

OPERATOR PRESENCE SYSTEM

Be sure operator presence and interlock systems are work- ing properly. If your tractor does not function as described, repair the problem immediately.

The engine should not start unless the clutch/brake pedal is fully depressed and attachement clutch control is in the disengaged position.

When the engine is running, any attempt by the operator to leave the seat without first setting the parking brake should shut off the engine.

When the engine is running and the attachment clutch is engaged, any attempt by the operator to leave the seat should shut off the engine.

The attachment clutch should never operate unless the operator is in the seat.

BLADE CARE

For best results mower blades must be kept sharp. Replace bent or damaged blades.

BLADE REMOVAL (See Fig. 8)

Raise mower to highest position to allow access to blades.

Remove blade bolt, lock washer and flat washer securing blade.

Install new or resharpened blade with trailing edge up towards deck as shown.

IMPORTANT: TO ENSURE PROPER ASSEMBLY, CENTER HOLE IN BLADE MUST ALIGN WITH STAR ON MANDREL ASSEMBLY.

Reassemble blade bolt, lock washer and flat washer in exact order as shown.

Tighten blade bolt securely (27-35 Ft. Lbs. torque).

IMPORTANT: BLADE BOLT IS GRADE 8 HEAT TREATED.

TRAILING

MANDREL

EDGE UP BLADE

ASSEMBLY

CENTER

 

HOLE

 

FLAT WASHER

 

LOCK WASHER

 

 

STAR

BLADE BOLT (GRADE 8)*

*A GRADE 8 HEAT TREATED BOLT CAN BE IDENTIFIED BY SIX LINES ON THE BOLT HEAD.

FIG. 8

TO SHARPEN BLADE (See Fig. 9)

NOTE: We do not recommend sharpening blade - but if you do, be sure the blade is balanced.

Care should be taken to keep the blade balanced. An un- balanced blade will cause excessive vibration and eventual damage to mower and engine.

The blade can be sharpened with a file or on a grind- ing wheel. Do not attempt to sharpen while on the mower.

To check blade balance, you will need a 5/8" diameter steel bolt, pin, or a cone balancer. (When using a cone balancer, follow the instructions supplied with balancer.)

NOTE: Do not use a nail for balancing blade. The lobes of the center hole may appear to be centered, but are not.

Slide blade on to an unthreaded portion of the steel bolt or pin and hold the bolt or pin parallel with the ground. If blade is balanced, it should remain in a horizontal position. If either end of the blade moves downward, sharpen the heavy end until the blade is balanced.

 

CENTER HOLE

5/8" BOLT

BLADE

 

OR PIN

 

FIG. 9

BATTERY

Your tractor has a battery charging system which is sufficient for normal use. However, periodic charging of the battery with an automotive charger will extend its life.

Keep battery and terminals clean.

Keep battery bolts tight.

Keep small vent holes open.

Recharge at 6-10 amperes for 1 hour.

NOTE: The original equipment battery on your tractor is maintenance free. Do not attempt to open or remove caps or covers. Adding or checking level of electrolyte is not necessary.

15

Page 15
Image 15
Weed Eater WET1742STA manual Tractor

WET1742STA specifications

The Weed Eater WET1742STA is a powerful and efficient string trimmer designed to handle various landscaping tasks with ease. It features a robust 17-inch cutting width that allows users to quickly cut through grass and weeds, making yard work more efficient. This trimmer is equipped with a reliable 2-cycle 17 cc engine, providing sufficient power to tackle dense vegetation without straining.

One of the standout features of the WET1742STA is its Easy Start technology. This user-friendly innovation ensures that starting the trimmer is simple, requiring minimal effort. With just a few pulls, users can expect a smooth ignition, which is especially beneficial for those who may have difficulty starting traditional gas-powered tools. Furthermore, the trimmer's lightweight design contributes to its overall ease of use, allowing for extended periods of operation without excessive fatigue.

The WET1742STA also incorporates the latest automatic feed spool system. This feature eliminates the need for manual line advancement, ensuring a continuous flow of cutting line as it is needed. This not only saves time but also minimizes interruptions during work sessions, allowing users to maintain their momentum while trimming.

In addition to its performance capabilities, this trimmer is designed with user comfort in mind. The ergonomic handle provides a secure grip, reducing vibration and making handling more comfortable during extended use. The adjustable telescoping shaft allows users to customize the length of the trimmer to their height, ensuring optimal control and reducing strain on the back.

Durability is another key aspect of the Weed Eater WET1742STA. Its sturdy construction is designed to withstand the rigors of outdoor use, and the quality materials used in its manufacturing help it last longer than comparable models. This trimmer is also easy to maintain, with accessible components that allow users to perform regular upkeep without hassle.

Overall, the Weed Eater WET1742STA stands out as a reliable and efficient tool for both homeowners and professional landscapers. With its combination of powerful performance, advanced features, and user-friendly design, it ensures that yard maintenance tasks are completed quickly and efficiently. Whether you're tackling overgrown areas or simply maintaining your lawn, this trimmer is equipped to meet your needs with precision and ease.