STORAGE

Immediately prepare your tractor for storage at the end of the season or if the tractor will not be used for 30 days or more.

WARNING: Never store the tractor with gasoline in the tank inside a building where fumes may reach an open flame or spark. Allow the engine to cool before storing in any enclosure.

TRACTOR

Remove mower from tractor for winter storage. When mower is to be stored for a period of time, clean it thoroughly, remove all dirt, grease, leaves, etc. Store in a clean, dry area.

Clean entire tractor (See “CLEANING” in the Mainte- nance section of this manual).

Inspect and replace belts, if necessary (See belt re- placement instructions in the Service and Adjustments section of this manual).

Lubricate as shown in the Maintenance section of this manual.

Be sure that all nuts, bolts and screws are securely fastened. Inspect moving parts for damage, breakage and wear. Replace if necessary.

Touch up all rusted or chipped paint surfaces; sand lightly before painting.

BATTERY

Fully charge the battery for storage.

After a period of time in storage, battery may require recharging.

To help prevent corrosion and power leakage during long periods of storage, battery cables should be dis- connected and battery cleaned thoroughly (see “TO CLEAN BATTERY AND TERMINALS” in the Mainte- nance section of this manual).

After cleaning, leave cables disconnected and place cables where they cannot come in contact with battery terminals.

If battery is removed from tractor for storage, do not store battery directly on concrete or damp surfaces.

ENGINE

FUEL SYSTEM

IMPORTANT: IT IS IMPORTANTTO PREVENT GUM DEPOSITS FROM FORMING IN ESSENTIAL FUEL SYSTEM PARTS SUCH AS CARBURETOR, FUEL FILTER, FUEL HOSE, OR TANK DURING STORAGE. ALSO, EXPERIENCE INDICATES THAT ALCOHOL BLENDED FUELS (CALLED GASOHOL OR USING ETHANOL OR METHANOL) CAN ATTRACT MOISTUREWHICH LEADSTO SEPARATION AND FORMATION OF ACIDS DURING STORAGE. ACIDIC GAS CAN DAMAGE THE FUEL SYSTEM OF AN ENGINE WHILE IN STORAGE.

Drain the fuel tank.

Start the engine and let it run until the fuel lines and carburetor are empty.

Never use engine or carburetor cleaner products in the fuel tank or permanent damage may occur.

Use fresh fuel next season.

NOTE: Fuel stabilizer is an acceptable alternative in mini- mizing the formation of fuel gum deposits during storage. Add stabilizer to gasoline in fuel tank or storage container. Always follow the mix ratio found on stabilizer container. Run engine at least 10 minutes after adding stabilizer to allow the stabilizer to reach the carburetor. Do not drain the gas tank and carburetor if using fuel stabilizer.

ENGINE OIL

Drain oil (with engine warm) and replace with clean en- gine oil. (See “ENGINE” in the Maintenance section of this manual).

CYLINDER(S)

Remove spark plug(s).

Pour one ounce of oil through spark plug hole(s) into cylinder(s).

Turn ignition key to “START” position for a few seconds to distribute oil.

Replace with new spark plug(s).

OTHER

Do not store gasoline from one season to another.

Replace your gasoline can if your can starts to rust. Rust and/or dirt in your gasoline will cause problems.

If possible, store your tractor indoors and cover it to give protection from dust and dirt.

Cover your tractor with a suitable protective cover that does not retain moisture. Do not use plastic. Plastic cannot breathe which allows condensation to form and will cause your tractor to rust.

IMPORTANT: NEVER COVERTRACTOR WHILE ENGINE AND EXHAUST AREAS ARE STILL WARM.

24

Page 24
Image 24
Weed Eater WET1742STA manual Storage, Other, Fuel System, Engine OIL, Cylinders

WET1742STA specifications

The Weed Eater WET1742STA is a powerful and efficient string trimmer designed to handle various landscaping tasks with ease. It features a robust 17-inch cutting width that allows users to quickly cut through grass and weeds, making yard work more efficient. This trimmer is equipped with a reliable 2-cycle 17 cc engine, providing sufficient power to tackle dense vegetation without straining.

One of the standout features of the WET1742STA is its Easy Start technology. This user-friendly innovation ensures that starting the trimmer is simple, requiring minimal effort. With just a few pulls, users can expect a smooth ignition, which is especially beneficial for those who may have difficulty starting traditional gas-powered tools. Furthermore, the trimmer's lightweight design contributes to its overall ease of use, allowing for extended periods of operation without excessive fatigue.

The WET1742STA also incorporates the latest automatic feed spool system. This feature eliminates the need for manual line advancement, ensuring a continuous flow of cutting line as it is needed. This not only saves time but also minimizes interruptions during work sessions, allowing users to maintain their momentum while trimming.

In addition to its performance capabilities, this trimmer is designed with user comfort in mind. The ergonomic handle provides a secure grip, reducing vibration and making handling more comfortable during extended use. The adjustable telescoping shaft allows users to customize the length of the trimmer to their height, ensuring optimal control and reducing strain on the back.

Durability is another key aspect of the Weed Eater WET1742STA. Its sturdy construction is designed to withstand the rigors of outdoor use, and the quality materials used in its manufacturing help it last longer than comparable models. This trimmer is also easy to maintain, with accessible components that allow users to perform regular upkeep without hassle.

Overall, the Weed Eater WET1742STA stands out as a reliable and efficient tool for both homeowners and professional landscapers. With its combination of powerful performance, advanced features, and user-friendly design, it ensures that yard maintenance tasks are completed quickly and efficiently. Whether you're tackling overgrown areas or simply maintaining your lawn, this trimmer is equipped to meet your needs with precision and ease.