6.Press a 50mm Square Inner Cap (22) into the end of the Top Frame (8).
Attach the Top Frame (8) to the Front Upright (6) with two M10 x 70mm Bolts (58), the 90mm Space Support Plate (21), and two M10 Nylon Locknuts (71).
Attach the Top Frame (8) to the Rear Upright (7) with two M10 x 70mm Bolts (58), the 70mm Space Support Plate (56), and an M10 Nylon Locknut (71).
Do not tighten the M10 Nylon Locknuts (71) yet.
7.Attach the Seat Frame (5) to the Front Upright (6) with two M10 x 70mm Bolts (58), two M10 Washers (26), and two M10 Nylon Locknuts (71).
Attach the Seat Frame (5) to the Seat Upright
(73)with two M10 x 70mm Bolts (58), two M10 Washers (26), and two M10 Nylon Locknuts (71).
Tighten the M10 Nylon Locknuts (71) used in steps 2–7.
ARM ASSEMBLY
8.Press a 50mm Square Inner Cap (22) into the Butterfly Frame (9).
Lubricate the M10 x 75mm Bolt (60) with grease. Attach the Butterfly Frame (9) to the Top Frame
(8) with the Bolt and an M10 Nylon Locknut (71).
Do not overtighten the Locknut; the Butterfly Frame must be able to pivot easily.
6 |
| 58 |
|
|
|
| |
| 21 |
| 58 |
| 8 | 71 |
|
|
|
| |
|
|
| 56 |
22 |
|
| 7 |
| 71 | 71 | |
|
| ||
|
|
| |
|
| 6 |
|
7 |
|
|
|
| 58 |
|
|
58 |
|
|
|
|
|
| 26 |
| 5 |
| 71 |
|
|
| 26 |
| 26 | 6 |
|
|
|
| |
| 73 |
|
|
71 | 26 |
|
|
8 |
|
|
|
| 8 |
|
|
| 22 |
|
|
| 71 |
|
|
|
| Lubricate |
|
|
| 60 |
|
| 9 |
|
|
7
