11.Attach the Curl Pad (29) to the Curl Post (28) with two M6 x 16mm Screws (30).
Press the two Weight Adapter Bushings (16) into the Weight Adapter (15).
12.Make sure all parts are properly tightened before you use the weight bench. The use of all remaining parts will be explained in ADJUSTMENTS, starting below.
11
29
28
15
16
163
ADJUSTMENTS
This section explains how to adjust the weight bench. See the EXERCISE GUIDELINES on page 10 for impor- tant information about how to get the most benefit from your exercise program. Also, refer to the accompanying exercise guide to see the correct form for each exercise.
Make sure all parts are properly tightened each time the weight bench is used. Replace any worn parts immediate- ly. The weight bench can be cleaned with a damp cloth and a mild,
REMOVING THE FOAM PADS
For some exercises, the indicated Foam Pads (19) and Pad Tube (17) should be removed from the Front Leg (3). To do this, slide one of the Foam Pads off the Pad Tube, and then remove the Pad Tube.
USING THE LEG LEVER
To use the Leg Lever (8), slide the desired amount of weight onto the Weight Tube (9).
To use Olympic weights with the Leg Lever (8), slide the Weight Adapter (15) onto the Weight Tube (9). Secure the Weight Adapter with the Weight Adapter Pin (24).
WARNING: Do not place more than 150 pounds on the Weight Tube (9).
3 |
19 |
17 |
19 |
8 |
24 |
15 |
9 |
Weight |
8
