3.Note: The following steps require two people.
Attach the Adjustment Leg (8) to the Rail (3) with an M10 x 90mm Bolt (44) and an M10 Nylon Locknut (32).
Attach the Support Leg (6) to the Rail (3) with an M10 x 75mm Bolt (43) and an M10 Nylon Locknut (32).
Note: Do not overtighten the Locknuts (32); the Adjustment Leg (8) and Support Leg (6) must pivot easily.
4.Have a second person hold the Cord (30) above the Seat (1). See the inset drawing. Slide the Seat Bracket (2) onto the Rail (3). Be sure that the
Wheels (21) are on top of the Rail and that the Large Bushings (23) are below the Rail.
Note: Be sure the Seat (1) is oriented as shown in the drawing.
5.Attach the Upper Bar (5) to the Rail (3) with two M10 Washers (35) and two M10 x 25mm Bolts (36).
3 |
|
|
|
| 3 |
|
|
32 |
|
|
|
| 6 |
|
|
| 43 |
|
|
44 | 8 |
|
|
|
|
| |
4 |
|
|
|
| Decal |
|
|
30 |
|
|
|
|
| 1 |
|
| 3 |
|
|
|
| 2 | 21 |
| 21 | ||
| 23 | 3 | 23 |
5 |
|
|
|
|
| 5 |
|
3 |
|
|
|
| 35 |
|
|
| 35 | 36 |
|
|
|
| |
7
