Weider WEBE17100 manual Tubes and Backrest must be oriented exactly As shown

7.	Press four 1Ó Square Inner Caps (12) into the	7
	indicated ends of the Backrest Tubes (5, 55).
	Press two 1Ó x 2Ó Inner Caps (45) into the ends of	Wide	6	12
	the adjustment tubes.	End
	With the wide end of the Backrest (6) positioned
	as shown, attach the Backrest Tubes (5, 55) to
	the Backrest (6) with four M6 x 38mm Screws	5		25
	(16) and four M6 Washers (25). The Backrest
	Tubes and Backrest must be oriented exactly			55
	as shown.
				16
		12	25	Adjustment
			16	Tubes
				25
			45	16
8.	Lubricate the M10 x 178mm Bolt (17). Attach the	8		6
	Backrest (6) to the Frame (2) with the Bolt, two
	M10 Washers (24), and an M10 Nylon Locknut
	(19). Do not overtighten the Nylon Locknut.
	The Backrest must be able to pivot freely.
	Secure the Backrest (6) to the Frame (2) with the		40	Adjustment
	Adjustment Pin (40) through one of the three sets	17ÑLubricate		Tubes
	of holes in the adjustment tubes. Secure the
	Adjustment Pin with the Pin Clip (57).		24
	Make sure the Adjustment Pin (40) is complete-
	ly inserted through both holes in the adjust-			2
			19
				57
9.	With the wide end of the Seat (11) positioned as	9
	shown, attach the Seat to the brackets on the		11
	Frame (2) with four M6 x 16mm Screws (15).
		Wide
		End
				2
				15
10.	Attach the Curl Pad (28) to the Curl Post (27) with	10
	two M6 x 16mm Screws (15).
			28
				15
				27
		8