Weider WESY2916.0 user manual Repeat this step for the Left Butterfly Arm

12.Apply grease to the locations shown and attach the Left Butterfly Bracket (28) to the Butterfly Frame (5) with an M10 x 80mm Bolt (84) and an M10 Nylon Locknut (77).

Repeat this step for the Right Butterfly Bracket (29).

Tighten the Nylon Locknuts (77, 78, 107) used in steps 2–12.

13.Attach a Butterfly Handle (27) to the Left Butterfly Arm (25) with an M10 x 65mm Button Bolt (106), two M10 Washers (80), two 13mm Steel Spacers (109), and an M10 Nylon Locknut (77).

Secure the Left Butterfly Arm (25) with an M10 x 82mm Button Screw (92) and an M10 Large Washer (105).

Repeat this step for the Right Butterfly Arm and Butterfly Handle (26, 27).

14.Apply grease in the locations shown and attach the Right Butterfly Arm (26) to the Right Butterfly Bracket (29) with an M10 x 75mm Bolt (82) and an M10 Nylon Locknut (77). Press a Bolt Cap

(44) onto the end of the Bolt. Do not overtighten the Bolt; the Butterfly Arm must be able to pivot freely.

Repeat this step for the Left Butterfly Arm (25).

12
	84
	Grease
29
5
77	28
13
		25	77
27			80
	109	109
26			27
	80
	106
	105
	92
14
	Grease
26		77
	82
44	29
		25

13