33.Locate the Leg Lever Cable (96). | Route the |
eyelet end of the Cable through the Right Leg |
|
(73)and attach it to the Leg Lever (4) with a 5/16” x 1” Shoulder Bolt (78) and a 5/16” Nylon Locknut
34.Attach a 3 1/2” Pulley (38) inside the Right Leg
(73)with a 3/8” x 2 3/4” Bolt (81), two 3/8” Washers (75), two 1/2” Spacers (34), and a 3/8”
Nylon Locknut (70).
35.Route the Leg Lever Cable (96) through the Right Upright (6) and around a 3 1/2” Pulley (38). Attach the Pulley and a Cable Trap (91) to the
Upright with a 3/8” x 3 3/4” Bolt (84), a 3/8” Washer (75), and a 3/8” Nylon Locknut (70).
36.Wrap the Leg Lever Cable (96) around a 3 1/2” Pulley (38). Attach the Pulley to the Double “U”- Bracket (102) with a 3/8” x 2” Bolt (62) and a 3/8”
Nylon | Locknut (70). | Be sure the Cable Trap is |
turned | to hold the Cable in the groove of the | |
Pulley. |
| |
33 |
|
|
|
4 |
|
|
|
71 |
| 73 |
|
|
|
| |
| 96 | 78 |
|
|
|
| |
34 |
|
|
|
| 70 | 73 | 38 |
|
|
| |
| 75 |
|
|
|
| 34 |
|
|
|
| 75 |
|
| 34 | |
|
|
| 81 |
35 |
| 6 |
|
|
|
| |
|
| 96 | |
|
| 70 |
|
|
| 75 |
|
|
|
| 91 |
|
|
| 84 |
|
| 38 | |
36 |
|
|
|
|
|
| 70 |
|
| 62 | 102 |
|
|
| |
|
|
| 96 |
|
| 38 |
|
15
