Weider WESY29520 user manual Bolt 84, a 3/8 Washer 75, and a 3/8, Locknut

45.Wrap the Low Cable (47) around a 3 1/2” Pulley (38). Attach the Pulley to the indicated bracket on

the Right Base (1) with a 3/8” x 2” Bolt (62) and a 3/8” Nylon Locknut (70).

46.Wrap the Low Cable (47) around a 3 1/2” Pulley

(38).Attach the Pulley and a Cable Trap (91) to the lower set of holes in the indicated “U”-Bracket

(85)with a 3/8” x 2” Bolt (62) and a 3/8” Nylon Locknut (70). Be sure the Cable Trap is turned

to hold the Cable in the groove of the Pulley.

47.Wrap the Low Cable (47) around a 3 1/2” Pulley (38). Attach the Pulley and a Cable Trap (91) to the side of the Right Upright (6) with a 3/8” x

3 3/4” Bolt (84), a 3/8” Washer (75), and a 3/8”

Nylon	Locknut (70).	Be sure the Cable Trap is
turned	to hold the Cable in the groove of the
Pulley.

48.Wrap the Low Cable (47) around a 3 1/2” Pulley (38). Attach the Pulley and a pair of Pulley

Covers (92) to the Right Upright (6) with a 3/8” x

3 3/4” Bolt (84), two 3/8” Washers (75), and a 3/8”

Nylon Jamnut (50). Be sure the small tabs on the Pulley Covers are on the side shown, and

the Cable is between the Pulley and the rod on the Upright.

45
		38
		47
	70
	1	62
46
	70		85
	91		62
	38		47
47
84	47
	91
	38
	6
		75	70
48	Small
	Tabs
	75
84
	92
		38	75
			50
	47	92
		6

18