![](/images/new-backgrounds/1293246/29324627x1.webp)
ATTACHING THE ACCESSORIES
To attach a Handle (49) to a high pulley, first attach the high pulley to the resistance system (see ATTACHING THE HIGH PULLEYS AND LEG LEVER on page 13). Then, attach the Handle to the Short Cable (33) with a Cable Clip (51).
The Ankle Strap (not shown) can be attached to the Long Cable (80) with Cable Clips (51). Attach the Leg Press Strap (not shown) to both ends of the Long Cable, or the optional lat bar to the Short Cables (33), with two Cable Clips.
Note: A lat bar is an optional accessory for the resistance system. To purchase a lat bar, call our Customer Service Department
ADJUSTING THE RESISTANCE
To add resistance, hold a
Note: When adding resistance, always start with the heaviest resistance bar to be used, and finish with the lightest resistance bar. When removing resistance bar from the
WARNING: When adding resist- ance, make sure that both ends of the resist- ance bar rest under the two
Note: The resistance system uses progressive resist- ance. As the resistance bar begin to bend, the amount of resistance will increase gradually. As the resistance bar bend further, the resistance will increase rapidly.
Additional resistance can be added to the resistance system. To purchase more resistance, call our Customer Service Department
33 |
51 |
49 |
80 |
Resistance |
Bars |
35 |
44 |
80 |
14