94 SERIES BOILER
SUGGESTED SPECIFICATIONS
I.General Requirements
A. Furnish and install ( ) low pressure, wet base, cast iron sectional boiler(s) with power burner(s) that pressurize the firebox and operate under forced and balanced draft.
B.Assemble and install
C.
1.(B)
2.(A)
3.(P)
4.Natural gas fired and/or No. 2 fuel oil.
5.Water or steam.
6.Forced or balanced draft.
D. Boiler(s) shall have I=B=R Hydronics Institute gross output(s) at 100% firing rate –
( ) MBH per boiler.
E.Boiler(s) shall be manufactured by ISO 9001 registered company to conform to Section IV of the ASME Boiler and Pressure Vessel Code.
1.Individual sections (and section assembly) to be hydrostatically pressure tested at factory in accordance with ASME requirements.
2.Maximum allowable working pressure 50 PSIG water and 15 PSIG steam cast as part of section with ASME symbol (Water only: optional 80 PSIG stamped in section in place of 50 PSIG).
F.Regulatory Requirements
1.Boiler(s) and controls to comply with applicable regulations.
2.Provide UL labeled burner(s).
3.Provide add option for local code(s) ie: MASS Code BAR
G.Submittals
1.Submit shop drawings and product data.
2.Submittal packet to include boiler (and burner) manufacturer descriptive literature, installation instructions, operating instructions, and maintenance instructions.
II.Product
A. Acceptable boiler/burner manufacturer(s) include(s):
1