Install element

Place element on brackets as shown.

Assemble multiple elements by soldering the male end on one element into the female end of another.

For horizontal runs of more than 30 feet, install expansion joints.

Holes for risers & connectors

Drill 1½" holes for risers or connectors

Solder elements to risers and to any additional

1C\," from wall tubing that may be required.

1C\," from wall

When attaching radiant tubing,

2 >\zn" above

solder connectors and let cool

before attaching tubing. Follow all

finished floor

tubing manufacturer's instructions.

Support bare tubing

Place return pipe in cradle provided by bracket, as shown.

Support bare supply tubing from bracket using wire hangers, (not supplied).

Install damper

aPlace open end of damper onto bracket half rounds.

bPress down and inward

to snap onto bracket.

Install front cover

a Hook bottom lip of front cover under lower bracket arm as shown.

b Lift the front cover until top lip of cover snaps over top prong of bracket.

If cover does not fit snugly, bend lower bracket arm down and reinstall front cover.

Dimensions

1-3/8

8

2

2-9/16

1-1/4

1-11/32

2-25/32

Ratings

 

Notes: I=B=R approved water ratings are based on the active (finned) length and

 

include the 15% addition for heating effect allowed by the I=B=R Testing

Therma Trim Model TT I=B=R Approved Water Ratings

and Rating Code for Baseboard Type of Radiation. The active length is 3"

less than the enclosure length. Ratings apply to the assembly with the

Capacities in BTU/Hr. per Linear Foot with 650F Entering Air

damper installed and adjusted to the normally open position.

Water Flow Rate

 

Average Water Temperature (0F)

 

GPM

Lbs/Hr

170

180

190

200

210

220

1

500

510

580

650

710

780

850

4

2000

540

610

690

750

820

900

The heating elements are constructed of 3/4" nominal copper tubing expanded into 1 7/8" x 2 11/32" aluminum fins, which are spaced 67 to the foot; fin thickness is .008". Elements are unpainted.

Use of I=B=R ratings at the 4 gpm flow rate is limited to installations in which the water flow rate through the baseboard unit is equal to or greater than 4 gpm. Where the water flow rate is not known, the I=B=R ratings at the standard flow rate of 1 gpm must be used. Flow rates exceeding 6 gpm should be avoided because of possible noise.

Pressure drop through Therma Trim Baseboard is 0.047" of water per linear foot at the 1 gpm flow rate. At the 4 gpm flow rate, pressure drop is 0.525" of water per linear foot.

Weil-McLain

500 Blaine Street

Michigan City, IN 46360-2388

http://www.weil-mclain.com

550-110-762/0400

Page 2
Image 2
Weil-McLain Electric Baseboard Heater Install element, Holes for risers & connectors, Support bare tubing, Install damper

Electric Baseboard Heater specifications

The Weil-McLain Electric Baseboard Heater is a highly efficient heating solution designed for residential and commercial environments. Renowned for its reliability and performance, this electric baseboard heater ensures consistent warmth throughout any space, making it an essential choice for homeowners seeking comfort and efficiency.

One of the primary features of the Weil-McLain Electric Baseboard Heater is its sleek, low-profile design. This design allows for easy installation in a variety of settings, fitting seamlessly into any room's decor without obstructing the flow of space. The heater can be placed along walls, underneath windows, or in tight areas, providing quality heat without compromising the aesthetics of a room.

The heater incorporates advanced heating technologies that promote energy efficiency. The built-in thermostat provides precise temperature control, allowing users to set their desired comfort level. This feature not only enhances user convenience but also helps in reducing energy consumption, resulting in lower utility bills.

Constructed from durable materials, the Weil-McLain Electric Baseboard Heater is designed for longevity and minimal maintenance. The unit’s robust design ensures that it can withstand regular use while maintaining high performance standards over time. It is available in various lengths and wattage options, which makes it easy to select the right unit for specific heating requirements.

Another key characteristic of the Weil-McLain Electric Baseboard Heater is its ease of installation. It comes with clear instructions and minimal components, allowing homeowners or professionals to set it up quickly and efficiently. This straightforward installation process, combined with its lightweight design, makes it an excellent choice for those looking to upgrade their heating systems without extensive renovations.

The heater operates quietly, providing a comfortable atmosphere without the noise commonly associated with other heating methods. This is particularly beneficial in settings where silence is necessary, such as bedrooms or offices.

In summary, the Weil-McLain Electric Baseboard Heater stands out due to its combination of style, efficiency, and durability. With its modern features, user-friendly design, and focus on energy conservation, it represents a superior heating solution that meets the demands of contemporary living. Whether for new constructions or retrofitting existing spaces, this electric baseboard heater is poised to deliver warmth and comfort for years to come.