Operation, Cleaning Instructions, Preparation, Hot Surface

1.Examine hotplate and control panel for condition before turning the ON/OFF SWITCH "ON". Clean as necessary before use.

2.Turn the ON/OFF SWITCH "ON" and allow the hotplate to pre-heat for 15 minutes before use .

USE

1.Set the container of pre-heated beverage on the hotplate.

The heating surface of the hotplate is bowl-shaped to safely hold curved-bottom containers, specifically standard coffee decanters.

2.DO NOT allow the container to run dry. Remove empty containers from hotplate immediately and allow to cool before reuse.

IMPORTANT:

Avoid storing flammable or combustible materials in, on or near the appliance.

OPERATION

CAUTION:

HOT SURFACE

Exposed surfaces can be hot to the touch and may cause burns.

CAUTION:

SHOCK HAZARD

DO NOT splash or pour water onto control panel or wiring.

PRECAUTIONS: Turn switch OFF and allow to cool before cleaning.

TOOLS: Soft Cloth or Sponge, Mild Detergent, Plastic Scouring Pad

CAUTION:

HOT SURFACE

Exposed surfaces can be hot to the touch and may cause burns. Allow to cool before cleaning.

1.Remove containers from hotplates. Turn ON/OFF SWITCH "OFF". Allow hotplate to cool completely before cleaning.

2.Wipe hotplate with a soft cloth or sponge moistened with water and mild detergent.

3.Use a plastic scouring pad to remove any hardened food particles or mineral deposits. Rub only in the direction of the visible grain lines.

4.Rinse hotplate by wiping with a soft cloth or sponge moistened with water.

5.Wipe control panel with a soft cloth or sponge moistened with water.

Procedure is complete

CAUTION:

ELECTRICAL

SHOCK HAZARD

DO NOT splash or pour water onto control panel or wiring.

Keep your stainless steel hot- plate clean and free from calcium buildup:

•Use alkaline, alkaline chlorinated or non-chloride cleanser.

•Use citric acid-based cleaners to remove calcium deposits.