Wells Magnetic Door Latch installation instructions 102.004, Service Bulletin, December, From

WELLS MANUFACTURING COMPANY

2 ERIK CIRCLE, P. O. Box 280

Verdi, NV 89439

Customer Service (775) 345-0444 Ext.502

fax: (775) 345-0569

www.wellsbloomfield.com

SERVICE BULLETIN

102.004

TO:	Wells Authorized Service Agencies	December 12, 2002
FROM:	Hanju Lee, National Service Manager
SUBJECT:	Magnetic Door Latch p/n 63946 - Replacement Parts

The following parts are available individually for the Magnetic Door Latch Assembly (p/n 63946):

PIN INSTALLATION INSTRUCTIONS

P/N Description

63946 Handle Assy Complete

65050 Grip, Vinyl

67527 Strike Assy

505774 Pin, Tongue

505775 Pin, Magnet

Pin Installation Instructions

1.Insert spring into recess in handle.

2.Note orientation of tongue. Press tongue against spring until holes line up.

3.Insert tongue pin from door side of handle.

Insert non-serrated end first. Press in until flush.

4.Assemble magnet.

Note: Offset hole in rubber section goes toward rear of handle.

5.Insert magnet into handle until holes line up.

6.Insert magnet pin from door side of handle.

Insert non-serrated end first. Press in until flush.

7.Remount handle on door.

SvcB 102.004 1 of 1 121202 cps