Weslo c6 user manual Assembly, Make sure that the power cord is unplugged, Upright Nuts yet

ASSEMBLY

Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials; do not dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to the top of the walking belt or the shipping carton. This does not affect treadmill performance. If there is lubricant on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner.

In addition to the included hex keys , assembly requires a phillips screwdriver			, an
adjustable wrench	, and needlenose pliers	.

Use the drawings below to identify hardware during assembly. Note: If a part is not in the parts bag, check to see if it has been preattached to one of the parts to be assembled. Extra hardware may be included. To avoid damaging plastic parts, do not use power tools for assembly.

Crossbar Star	Handrail Star	Upright Star	Wheel Housing
Washer (7)–2				Upright Washer
	Washer (5)–4	Washer (9)–2	Washer (32)–4
				(14)–6
Wheel Housing		Crossbar Screw	Console Screw/	Handrail Bolt (8)–4
	Upright Nut (16)–4	(85)–2	Latch Screw (95)–6
Nut (43)–4
Wheel Housing Bolt (13)–4			Upright Bolt (2)–4
		Frame Bolt (1)–2

1. Make sure that the power cord is unplugged.	1
Have a second person hold the Base (52) in the
position shown.
Identify the Left Upright (53) (the Right Upright [54]	Large	14
		2
has a large hole near the lower end).	Hole		16
	54
Hold the Left Upright (53) so the two small
		14		14
holes are on top as shown. Insert two Upright
Bolts (2) into the bracket on the Left Upright.			52	2
				16
Then, attach the Left Upright to the Base (52) with	Small
the Upright Bolts, two Upright Washers (14) and
	Holes
two Upright Nuts (16). Do not tighten the				14
Upright Nuts yet.
Attach the Right Upright (54) to the Base (52) in			53
the same way.
	6