2.Slide the two Wheel Housings (45) onto the Base (52). Attach each Wheel Housing with two Wheel Housing Bolts (13), two Wheel Housing Washers (32), and two Wheel Housing Nuts (43).
2
45
13 
32
43
32
32
45 
43
13 | 32 |
|
52
3. Position the Base (52) as close to the front of the | 3 | 3a |
|
treadmill as possible. |
| 98 |
|
See drawing 3a. Locate the wire tie in the Right |
| 98 | 54 |
|
|
| |
Upright (54). Tie the wire tie securely to the con- |
|
| Wire Tie |
nector on the end of the Wire Harness (98). |
|
| |
|
|
| |
Next, pull the opposite end of the wire tie out of |
|
|
|
the upper end of the Right Upright (54), until the |
| 54 |
|
Wire Harness is routed completely through the |
| 52 |
|
Right Upright. Secure the Wire Harness to the |
|
|
|
upper end of the Right Upright so that it will not |
| 3b |
|
fall inside. |
|
|
|
See drawing 3b. Press the indicated Grommet |
|
| 54 |
|
| 49 | |
(49) into the Right Upright (54). |
|
| |
|
| 98 |
|
|
|
| 52 |
7
