3.Cut the plastic tie holding the cage nut in the upper end of the Left Handrail (2).

Position the Left Handrail (2) on the left Upright (14). The lower end of the Left Handrail should be on the outside of the Extension Leg (41) as shown. Thread a Handrail Bolt

(15)with a Handrail Washer (16) into the left Upright and the Left Handrail. Do not tighten the Handrail Bolt yet.

Attach the lower end of the Left Handrail (2) to the Extension Leg (41) with a 3 1/2Ó Handrail Bolt (59), a 5/16Ó Washer (32), and a Handrail Nut (82). Do not tighten the Handrail Bolt yet.

4.With the help of a second person, lift the Right Handrail (57) off the right Upright (14). Hold the Console Base (6) and the Right Handrail in the position shown. Feed all of the excess Wire Harness (26) into the Right Handrail, through the indicated bracket, and down into the right Upright; bend the Wire Harness, if necessary.

Cut the indicated plastic tie off the Right Handrail (57).

Make sure that the Wire Harness (26) is in the bracket and insert the bracket into the right Upright (14). Make sure that the Wire Harness is not pinched.

5.Thread a Handrail Bolt (15) with a Handrail Washer (16) into the right Upright (14) and the Right Handrail (57). Do not tighten the Handrail Bolt yet.

Attach the lower end of the Right Handrail (57) to the Extension Leg (41) with a 3 1/2Ó Handrail Bolt (59), a 5/16Ó Washer (32), and a Handrail Nut (82).

Tighten all parts used in this step and in step 3.

6.Attach the Console Base (6) to the Left and Right Handrails (2, 57) with four Screws (55). Align the holes in the Reading Rack (88) with the holes in the Console Base

(6). Attach the Reading Rack with the four Reading Rack Screws (74) as shown.

7.Make sure that all parts are tightened before you use the treadmill. Keep the included allen wrench in a safe

place. The allen wrench is used to adjust the walking belt (see page 13). To protect the floor or carpet, place a mat

6(not included) under the treadmill.

3

 

 

 

15

 

 

16

 

14

2

 

 

 

 

41

 

 

82

 

59 32

 

4

 

 

 

6

 

 

Bracket

Plastic Tie

 

 

 

 

26

 

57

14

 

 

5

 

 

 

 

15

 

 

16

 

57

 

 

 

14

 

41

 

 

82

 

 

 

32

 

 

59

6

88

 

57

 

 

 

6

74

 

 

 

55

2

 

 

 

 

55

Page 6
Image 6
Weslo Cadence DL40 user manual Tighten all parts used in this step and in step