VIZIO 60HZ E SERIES User Manual
Adjusting the TV Settings
If you did not set up your HDTV for DTV / TV channels using the Initial Setup screens or if your setup has changed, you can do so from the TV menu.
Press MENU/OK key to bring up the OSD menu, the default option is
TV. Select it by pressing either the MENU/OK key
The following options are available in the TV menu:
1.Input - This option allows to select the input, it being either DTV/TV, A/V, Component,
HDMI1, HDMI2, HDMI3, HDMI4, RGB and PHOTO.
2.Channels - This option allows to select the type of signal input, it being either antenna signal (over the air) or direct cable service (no a
3.Menu Language - This option allows selecting the language to which it is preferred to have the OSD menu and instructions available to you.
4.Date & Time – Allows adjusting the displayed time and date.
5.PC Settings – If the selected input is connected through RGB (computer being used), this option allows adjusting of display to accommodate the signal content.
Adjusting the Picture Settings
When viewing DTV / TV or an HDMI, Component, or AV source, the following picture adjustment OSD screens are available when you press MENU/OK button on the remote control.
Press ▲ / ▼ / ◄ / ► to highlight and select the choice, then press MENU/OK key to select the desired adjustment, and then press the EXIT key when finished making adjustments.
| 38 |
Version 3/17/2010 | www.VIZIO.com |
