PROBLEM: The console displays remain lit when you remove the key from the console
SOLUTION: a. The console features a display demo mode, designed to be used if the treadmill is displayed in a store. If the displays remain lit when you remove the key, the demo mode is turned on. To turn off the demo mode, hold down the Stop button for a few seconds. If the displays are still lit, see THE INFORMATION MODE on page 17 to turn off the demo mode.
PROBLEM: The walking belt slows when walked on
SOLUTION: a. Use only a
b. If the walking belt is overtightened, treadmill perfor- b mance may decrease and the walking belt may be-
come damaged. Remove the key and UNPLUG THE POWER CORD. Using the hex key, turn both rear roller bolts counterclockwise, 1/4 of a turn. When the walking belt is properly tightened, you should be able to lift each edge of the walking belt 2 to 3 in. (5 to 7 cm) off the walking platform. Be careful to keep the walking belt centered. Then, plug in the power cord, insert the key, and run the treadmill for a few minutes. Repeat until the walking belt is properly tightened.
c.If the walking belt still slows when walked on, please see the front cover of this manual.
PROBLEM: The walking belt is
SOLUTION: a. If the walking belt is |
|
|
|
|
|
| |
and UNPLUG THE POWER CORD. If the walking |
| a |
|
belt has shifted to the left, use the hex key to turn |
|
|
|
the left rear roller bolt clockwise 1/2 of a turn; if the |
|
|
|
walking belt has shifted to the right, turn the left |
|
|
|
bolt counterclockwise 1/2 of a turn. Be careful not to |
|
|
|
overtighten the walking belt. Then, plug in the power |
|
|
|
cord, insert the key, and run the treadmill for a few |
|
|
|
minutes. Repeat until the walking belt is centered. |
|
|
|
|
|
| |
b. If the walking belt slips when walked on, first remove |
|
|
|
the key and UNPLUG THE POWER CORD. Using |
| b |
|
the hex key, turn both rear roller bolts clockwise, 1/4 |
|
|
|
of a turn. When the walking belt is correctly tightened, |
|
|
|
you should be able to lift each edge of the walking |
|
|
|
belt 2 to 3 in. (5 to 7 cm) off the walking platform. Be |
|
|
|
careful to keep the walking belt centered. Then, plug |
|
|
|
in the power cord, insert the key, and carefully walk |
|
|
|
on the treadmill for a few minutes. Repeat until the |
|
|
|
|
|
| |
walking belt is properly tightened. |
|
|
|
21
