1.Have a second person hold the Base (52) in the position shown.
Identify the Left Upright (53) (the Right Upright [54] has a large hole near the lower end).
Hold the Left Upright (53) so the bend is in the posi- tion shown. Insert two M10 x 58mm Bolts (2) into the bracket on the Left Upright. Attach the Left Upright to the Base (52) with the Bolts, two M10 Washers (14), and two M10 Nuts (16). Do not tighten the Nuts yet.
Attach the Right Upright (54) to the Base (52) in the same way.
2.Slide the two Wheel Housings (62) onto the Base (52) with the head of the M10 x 62mm Bolts (35) on the out- side as shown. Attach each Wheel Housing with two M6 x 58mm Bolts (6), two M6 Washers (11), and two M6 Nuts (15).
1 |
|
|
|
|
| 52 |
|
|
| 14 |
|
| 54 | 16 |
|
|
|
| |
|
| Large | 14 |
|
| Hole | 16 |
|
| 2 | |
|
|
| |
| 53 |
|
|
|
|
| 14 |
|
|
| 2 |
|
| Bend |
|
2 | 35 |
|
|
| 62 | 15 |
|
|
|
| |
| 6 | 11 | 35 |
|
|
| |
| 52 | 62 | 15 |
|
|
| 11 |
|
| 6 |
|
7
