(Continued)
Connections Connect all necessary parts before connecting the power plug.
When a Clearer Picture Is Desired
You can enjoy pictures of better quality using the following cord instead of the supplied video cord.
Connecting by using the S-video cord
|
| |
Main unit | (not supplied) | TV |
Connect the ends of
Connecting by using the component video cord
You can enjoy better quality pictures than when using the
TV
Component video cord (not supplied)
Main unit
CAUTION
•Use one of either the
NOTE
•In order to enjoy pictures with the progressive
mode ( 
page 19), the TV is required to have progressive video input.
•If the component video input jacks of your TV are BNC type, use a plug adapter (not supplied) to convert the plugs.
Connecting the Power Plug
AC outlet | Main unit (rear view) |
•After making all other necessary connections, connect in the power plug.
•If not using this product for a long period, discon- nect the power plug from the AC outlet for safety and to save electricity.
•The clock setting will be lost after the power plug has been disconnected or the power is inter- rupted for more than 1 minute. The timer set- tings will be lost when the power is interrupted. When the power is restored, set the clock and the timers again.
Disabling the Demonstration Display
When you connect the power plug into the AC outlet, "DEMO START!" appears in the display window and the demonstration display starts.
Before using the main unit, turn off the demon- stration display by setting the function to "DEMO CLEAR".
■When the power is turned off
Hold down 
on the main until "DEMO CLEAR" appears.
Disconnecting and then reconnecting the power plug will not start the demonstration display.
NOTE
•To activate the demonstration display again, hold
down 
on the main unit while the power is off until "Hello" appears.
•Activating the demonstration display turns on the main unit.
•When you press a button on the main unit, "DEMO OFF" appears in the display window and the demonstration display is canceled. (Discon- necting and then reconnecting the power plug will start the demonstration display again.)
15
