JVC UXQD90S 1, 2, 3, 4

Introduction

19

(Continued)

Basic operations

Before playing back video discs, you need to

select the color system and the video processing

system.

NOTE

• Make sure that the main unit is connected with the

TV using a component video cord when you select

the progressive mode ( page 15).

1Press , and then press

.

2Hold down for approximately

2 seconds.

• Currently selected color system and the

video processing system appear on the dis-

play window.

3Press

to select the desired

system.

"PAL PROG ." or "NTSC PROG

." gives finer detailed

images than "PAL" or "NTSC".

4While the selected system is dis-

played, press .

NOTE

• Some TVs may not be compatible with the progres-

sive mode. In this case, select "PAL" or "NTSC".

• All progressive TVs and High-Definition TVs

manufactured by JVC are compatible with "PAL

PROG." and "NTSC PROG."

• Before playing back a disc, it is also required to

select the correct "MONITOR TYPE" in the "PIC-

TURE" menu according to the aspect ratio of

your TV ( page 39).

• If you play back an NTSC disc with this setting

set to "PAL" or "PAL PROG.", you can watch the

playback pictures (the disc will be reproduced

using "PAL 60" format), but the TV screen may

rolls over upward and downward rapidly.

• If you play back a PAL disc with this setting set to

"NTSC" or "NTSC PROG.", you can watch the

playback pictures, but the following symptoms

may occur:

• The items on the disc menu will be blurred, and

be shown slightly shifted when highlighted.

• The aspect ratio of the picture may differ from

the original aspect ratio.

• The picture movement is not smooth.

For the locations of remote control

buttons, refer to page 16.

Selecting the Color System

and the Video Processing

System (SCAN MODE)

PAL PAL color system in the interlace

mode is selected.

PAL PRO G

.

PAL color system in the progressive

mode is selected. Make sure that the

TV supports PAL progressive video

input ( page 15).

NTSC NTSC color system in the interlace

mode is selected.

NTSC PROG

.

NTSC color system in the progressive

mode is selected. Make sure that the

TV supports NTSC progressive video

input ( page 15).

UX-QD90[UNUS].book Page 19 Thursday, September 29, 2005 1:29 PM

Contents

Main MICRO COMPONENT DVD SYSTEM DVD UX-QD90S Consists of CA-UXQD90S and SP-UXQD90S CA-UXQD90S SP-UXQD90S INSTRUCTIONS English Warnings, Cautions and Others / G-1 IMPORTANT FOR LASER PRODUCTS / CAUTION G-2 Front view Side view 1 Table of Contents Listening to Discs Basic Operations Notes on Operation.............................. 3 Special Cautions................................... 6 2 Reference Listening to Cassette Tapes Listening to Other Equipment Recording Sound Convenient Functions Notes on Operation Suitable Locations for the Main Unit Listener's Etiquette Condensation Cleaning the Main Unit Playable DVD/CD Types Notes on Operation Disc Structure Introduction English Special Cautions Important cautions Supplied Accessories Safety precautions When condensation or water drops adhere to the lens Voltage Adjustment Introduction/Preparation English Part Description 9 Remote Control Remote control operation Inserting Batteries into the 10 1 Press number buttons ( - , ). selector to the TV side. 2 Hold down until step 4 is completed. Connections 1 2 3 When radio reception with the supplied AM loop antenna is poor Connect all necessary parts before connecting the power plug. 12 Preparation English When radio reception with the supplied FM antenna is poor, or when using a communal antenna Connecting the FM antenna Connect all necessary parts before connecting the power plug. Connecting the Speakers 14 Connecting Other Equipment Read this section when connecting other audio equipment to this product. Other audio equipment Audio cord (not supplied) Connecting with digital equipment Connecting with a TV Hold down on the main until "DEMO CLEAR" appears. When a Clearer Picture Is Desired Connecting by using the S-video cord Connecting by using the component video cord Connecting the Power Plug Basic Operations 1 2 or 3 4 5 6 1 "MANUAL". 2 Press . For adjusting treble sound; Press . Turning On/Off the Main Unit Temp orar ily Tu rnin g Off the Sound (FADE MUTING) Emphasizing Heavy Bass Sound (AHB PRO) Changing the Display Brightness (DIMMER) Changing the Color Patterns Basic operations 1 2 3 2 seconds. Currently selected color system and the video processing system appear on the dis- play window. Listening to Radio Broadcasts Setting the AM Tuner Spacing 1 2 Tuning In to a Preset Radio Station 1 3 4 1 2 Selecting a Radio Station Storing Radio Stations (Preset) Listening to Radio Broadcasts/Listening to Discs English Basic Operations of the DVD Player Display while the DVD VIDEO is stopped: (Refer to page 37 for playing back MP3/WMA and JPEG.) 1 The disc tray comes out. Display for a DVD VR Display for CD Display for DVD AUDIO Display for VCD/SVCD Listening to Discs English Playing Back from a Position 10 Seconds Before (One Touch Replay) PBC (Playback control) 25 How to suspend playback 2510 20 60 Stopping Playback Resuming Playback (RESUME) Pausing Playback Advancing Picture Frame by Frame Fast Reverse/Fast Forward Search 1 selector to AUDIO. 2 or ) to select the track/ chapter you want to listen to. Slow Motion Playback 1 2 3 4 1 2 3 Selecting a Track from the Menu Screen Using the Menu Screen for DVD VRs Convenient Functions of the DVD Player While a disc containing two or more audio is being played back 2/3 CHINESE Example: For DVD VIDEO Each time you press , the audio will be changed. The audio can changed by pressing . 2 subtitle. Magnifying the Picture (ZOOM) While a disc containing two or more view angles is being played back Select the portion you want to see by pressing 2 5 to select VFP mode. 1 2 playback to select a bonus group. 3 the pin code (4 digits). 1 Press to select "PROGRAM". 3 or ) to program chapters/ tracks. Browsable Still Pictures (B.S.P.) 33 Display for CD/VCD/SVCD Erasing the whole program Display for MP3/WMA While playback is stopped, press or repeatedly. 1 "RANDOM". Example: For CD "RANDOM" appears in the TV screen. While playback is stopped, press repeatedly to display an item other than "RANDOM". Status Bar and Menu Bar Function list Number buttons VCD/SVCD/CD (the example below is for a CD) You can display the status bar and menu bar on the TV screen, and can control discs with the bars. 2 Canceling A-B repeat playback 4 5 6 2 3 5 Playing Back the Designated Part Repeatedly (A-B Repeat Playback) Designate the Time (Time Search) Playing Back MP3/WMA and JPEG Discs 1 2 3 4 Slide-show playback Preferences Basic Operations This section explains basic operation for changing various settings. While a disc is stopped or no disc is loaded (while "NO DISC" is displayed) Proceed with operations by following the description on the TV screen. AUDIO List of relationships of DIGITAL AUDIO OUTPUT preference items and output signal OTHERS Language Codes Listening to Discs/Listening to Cassette Tapes English Listening to Cassette Tapes 1 2 the reverse mode. Listening to Other Equipment 1 2 3 Adjusting the Sound Input Level from Other Equipment 44 Recording Sound to Cassette Tapes 1 ing. 2 mode. 3 4 Quitting Recording Recording Only One Track from a Disc Recording the Second or Subsequent Track to the Last Track from a Disc 46 Using the Timers Sleep Timer Changing the sleep timer setting Confirming the sleep timer setting (remaining time) 1 2 3 5 6 8 13 14 1 want to play back. 2 7 desired day of the week. 8 9 "PLAY TIMER". 10 11 Auto Standby When the disc or cassette tape is selected as a sound source Press once again. Auto standby performance 51 Disc Ejection Lock Canceling the disc ejection lock Operations While holding down , press on the main unit. Using AV COMPU LINK Handling Discs/Cassette Tapes Cleaning the main unit cabinet Handling discs Cleaning discs Handling cassette tapes Cleaning the tape deck head Disc Messages Troubleshooting 54 Reference English Specifications DVD receiver (CA-UXQD90S) Speaker (SP-UXQD90S) Micro component DVD system (UX-QD90S) UX-QD90SMICROCOMPONENTDVDSYSTEM Mains (AC) Line Instruction (AC) Bottom view of the main unit MICRO COMPONENT DVD SYSTEM English UX-QD90S Consists of CA-UXQD90S and SP-UXQD90S INSTRUCTIONS Warnings, Cautions and Others G-1 IMPORTANT FOR LASER PRODUCTS CAUTION CAUTION F button! G-2 CAUTION Proper Ventilation In addition, maintain the best possible air circulation. 1 Table of Contents Listening to Discs Basic Operations Basic Operations of the DVD Player Notes on Operation .............................. 3 2 Reference Listening to Cassette Tapes Listening to Other Equipment Recording Sound Convenient Functions Notes on Operation Suitable Locations for the Main Unit Listener's Etiquette Condensation Cleaning the Main Unit Playable DVD/CD Types Notes on Operation Disc Structure Special Cautions Important cautions Supplied Accessories Safety precautions When condensation or water drops adhere to the lens Voltage Adjustment Introduction/Preparation Part Description 9 Remote Control Remote control operation Inserting Batteries into the 10 1 Press number buttons ( - , ). selector to the TV side. 2 Hold down until step 4 is completed. Connections 1 2 3 When radio reception with the supplied AM loop antenna is poor Connect all necessary parts before connecting the power plug. 12 When radio reception with the supplied FM antenna is poor, or when using a communal antenna Connecting the FM antenna Connect all necessary parts before connecting the power plug. Connecting the Speakers 14 Connecting Other Equipment Read this section when connecting other audio equipment to this product. Other audio equipment Audio cord (not supplied) Connecting with digital equipment Connecting with a TV Hold down on the main until "DEMO CLEAR" appears. When a Clearer Picture Is Desired Connecting by using the S-video cord Connecting by using the component video cord Connecting the Power Plug Basic Operations 1 2 or 3 4 5 6 1 "MANUAL". 2 Press . For adjusting treble sound; Press . Turning On/Off the Main Unit Temporarily Turning Off the Sound (FADE MUTING) Emphasizing Heavy Bass Sound (AHB PRO) Changing the Display Brightness (DIMMER) Changing the Color Patterns Basic operations 1 2 3 2 seconds. Currently selected color system and the video processing system appear on the dis- play window. Listening to Radio Broadcasts Setting the AM Tuner Spacing 1 2 Tuning In to a Preset Radio Station 1 3 4 1 2 Selecting a Radio Station Storing Radio Stations (Preset) Listening to Radio Broadcasts/Listening to Discs Basic Operations of the DVD Player Display while the DVD VIDEO is stopped: (Refer to page 37 for playing back MP3/WMA and JPEG.) 1 The disc tray comes out. Basic Operations of the DVD Player Display for a DVD VR Display for CD Display for DVD AUDIO Display for VCD/SVCD Playing Back from a Position 10 Seconds Before (One Touch Replay) PBC (Playback control) 25 How to suspend playback 2510 20 60 Stopping Playback Resuming Playback (RESUME) Pausing Playback Advancing Picture Frame by Frame Fast Reverse/Fast Forward Search 1 selector to AUDIO. 2 or ) to select the track/ chapter you want to listen to. Slow Motion Playback 1 2 3 4 1 2 3 Selecting a Track from the Menu Screen Using the Menu Screen for DVD VRs Convenient Functions of the DVD Player While a disc containing two or more audio is being played back 2/3 CHINESE Example: For DVD VIDEO Each time you press , the audio will be changed. The audio can changed by pressing . 2 subtitle. Magnifying the Picture (ZOOM) While a disc containing two or more view angles is being played back Select the portion you want to see by pressing 2 5 to select VFP mode. 1 2 playback to select a bonus group. 3 the pin code (4 digits). 1 Press to select "PROGRAM". 3 or ) to program chapters/ tracks. Browsable Still Pictures (B.S.P.) Confirming programmed content Canceling program playback Erasing the whole program 34 1 "RANDOM". Example: For CD "RANDOM" appears in the TV screen. While playback is stopped, press repeatedly to display an item other than "RANDOM". Status Bar and Menu Bar Function list Number buttons VCD/SVCD/CD (the example below is for a CD) You can display the status bar and menu bar on the TV screen, and can control discs with the bars. 2 Canceling A-B repeat playback 4 5 6 2 3 5 Playing Back the Designated Part Repeatedly (A-B Repeat Playback) Designate the Time (Time Search) Playing Back MP3/WMA and JPEG Discs 1 Playback 2 3 4 Slide-show playback Preferences Basic Operations This section explains basic operation for changing various settings. While a disc is stopped or no disc is loaded (while "NO DISC" is displayed) Proceed with operations by following the description on the TV screen. AUDIO List of relationships of DIGITAL AUDIO OUTPUT preference items and output signal OTHERS Language Codes Listening to Discs/Listening to Cassette Tapes Listening to Cassette Tapes 1 2 the reverse mode. Listening to Other Equipment 1 2 3 Adjusting the Sound Input Level from Other Equipment 44 Recording Sound to Cassette Tapes 1 ing. 2 mode. 3 4 Quitting Recording Recording Only One Track from a Disc Recording the Second or Subsequent Track to the Last Track from a Disc 46 Using the Timers Sleep Timer Changing the sleep timer setting Confirming the sleep timer setting (remaining time) 1 2 3 5 6 8 13 14 1 want to play back. 2 7 desired day of the week. 8 9 "PLAY TIMER". 10 11 Auto Standby When the disc or cassette tape is selected as a sound source Press once again. Auto standby performance 51 Disc Ejection Lock Canceling the disc ejection lock Operations While holding down , press on the main unit. Using AV COMPU LINK Handling Discs/Cassette Tapes Cleaning the main unit cabinet Handling discs Cleaning discs Handling cassette tapes Cleaning the tape deck head Disc Messages Troubleshooting 54 Reference Specifications DVD receiver (CA-UXQD90S) Speaker (SP-UXQD90S) Micro component DVD system (UX-QD90S) Mains (AC) Line Instruction