(Continued)
Listening to Radio Broadcasts
For the locations of remote control buttons, refer to page 20.
Selecting a Radio Station
1 Press 
to select "FM" or "AM".
Example: While an FM radio broadcast is received
Stereo indicator Preset number ( | on the right) |
Frequency
2 Press 
or 
repeatedly to select a radio station (frequency).
•You can also select a radio station using the automatic tuning.
Automatic tuning:
Hold down 
or 
until the fre- quency starts changing, and then release the button.
When the main unit has received a broad- cast, the frequency automatically stops changing.
To quit the function while searching for a
broadcast, press 
or 
.
•When the main unit has received an FM stereo broadcast, "STEREO" lights up.
Switching the FM reception (stereo/ monaural):
If an FM stereo broadcast is difficult to hear because of noise, you may be able to hear
more easily by pressing 
to switch
the sound to monaural reception. In this case, "MONO" lights up. To return the sound
to stereo reception, press 
again.
Storing Radio Stations (Preset)
You can store up to 30 FM radio stations and up to 15 AM radio stations.
■While the broadcast from the radio station you want to preset is being received
1 Set the remote control mode selector to AUDIO.
2 Press 
.
•The preset number flashes for approxi- mately 5 seconds.
3 While the preset number is flash- ing, press the number buttons
( 
- 
or 
) to select the pre- set number you want to use.
• Refer to "Using the number buttons"
( 
page 16).
• You can also select the preset number by
pressing 
or 
.
4 While the selected number is
flashing, press 
or 
.
•"STORED" appears and the selected radio station is stored.
NOTE
•The type of FM reception (stereo/monaural) is also
stored ( 
on the left).
•When you store a radio station to a preset num- ber to which another radio station has previously been stored, the newly set radio station replaces the previously stored radio station.
Tuning In to a Preset Radio Station
■While an FM or AM broadcast is being received
1 Set the remote control mode selector to AUDIO.
2 Use the number buttons to select the preset number of the radio sta- tion to which you want to tune in.
•Refer to "Using the number buttons"
(
page 16).
•You can also select the preset number by
pressing 
or 
.
21
