HANDRAILHEIGHTADJUSTMENT
The Handrails (4, 88) can be adjusted to either of two heights.
Before adjusting the Handrails, remove the key and unplug the power cord.
Remove the four Console Screws (3). While a second person lifts the Console Base (87), remove the Handrail Bolts (1), Handrail Washers (80), and Handrail Star Washers (2). Raise or lower the Handrails (4, 88) to the desired height, being care- ful not to damage the Wire Harness (53). Reattach the Handrails with the Handrail Bolts, Handrail Washers, and Handrail Star Washers. (Important: If you are 5'8" or taller, use the lower two holes in the Handrail; if you are shorter than 5'8", use the upper two holes. Make sure that both
Handrails are at the same height. Do not tighten the
Handrail Bolts yet. Always attach each Handrail with two
Handrail Bolts.) Reattach the Console Base (87) (see assem-
bly step 3 on page 6). Then, tighten the four Handrail Bolts.
HOW TO FOLD AND MOVE THE TREADMILL
HOW TO FOLD THE TREADMILL FOR STORAGE
Before folding the treadmill, unplug the power cord.
CAUTION: You must be able to safely lift 45 pounds (20 kg) in order to raise, lower or move the treadmill.
1.Hold the treadmill with your hands in the locations shown at the right. To decrease the possibility of injury, bend your legs and keep your back straight. As you raise the treadmill, make sure to lift with your legs rather than your back. Raise the treadmill about halfway to the vertical position.
2.Move your right hand to the position shown and hold the
treadmill firmly. Using your left thumb, press the storage latch and hold it. Pivot the treadmill until the frame and
foot rail are past the storage latch. Close the storage latch over the catch. Make sure that the storage latch is fully engaged over the catch.
To protect the floor or carpet from damage, place a mat under the treadmill. Keep the treadmill out of direct sunlight. Do not leave the treadmill in the stor- age position in temperatures above 85 ° Fahrenheit.
10